User manual BOSCH PVQ695FC5E

[. . . ] Activating and deactivating the childproof lock . Additional information on products, accessories, replacement parts and services can be found at www. The instruction and installation manual, as well as the appliance certificate, in a safe place for later use or for subsequent owners. Check the appliance after removing it from the packaging. [. . . ] Set the desired time in the settings area. After a few seconds, the time begins to elapse. Changing or deleting the time Touch the 0 symbol repeatedly until the V indicator lights up. Change the time in the settings area or set << in order to delete the programmed time. when the time has elapsed An audible signal sounds. << appears on the timer display and the V indicator lights up. When the 0 symbol is touched, the displays go out and the audible signal ceases. The PowerBostfunction PowerBoost function enables you to heat up large quantities of water faster than when using heat setting S. This function can always be activated for a hotplate, provided the other hotplate in the same group is not in use (see illustration). Otherwise, > and S will flash in the display for the selected hotplate; the S heat setting will then be set automatically without activating the function. Note: In the Combi zone, the PowerBoost function can only be activated if the two cooking zones are used independently of each other. Select the S heat setting and then touch the boostG symbol. > goes out on the display and the hotplate switches back to the S heat setting. Note: In certain circumstances, the PowerBoost function can switch itself off automatically in order to protect the electronic elements inside the hob. This FryingSensor function can be used to fry food while maintaining the suitable frying pan temperature. The cooking zones that have this function are identified by the roasting function symbol. advantages when frying The hotplate only heats up if this is required to maintain the temperature. This saves energy and prevents the oil or fat from overheating. The frying function reports when the empty frying pan has reached the optimum temperature for adding oil and then for adding the food. Otherwise, the function does not activate correctly. You can use a splash guard to prevent splashes of grease. If butter, margarine, extra virgin olive oil or lard is used, set heat setting ~. [. . . ] If a fault occurs, the appliance will not switch to standby mode. Our Customerservice after-sales service is there for you if your appliance needs to be repaired. 4Customer service E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after-sales service. The rating plate bearing these numbers can be found: on the appliance certificate. [. . . ]