User manual BOSCH SENSIXX B22L

[. . . ] 14 BOSCH * Modellabhängig EN • Operating instructions Thank you for buying the Sensixx B22L steam station, the new steam-ironing system from Bosch. Carefully read through the operating instructions for the appliance and safeguard them for future reference. You can download this manual from the local homepages of Bosch. English Open the leaflet sides General safety instructions ❐❐ During the use, the decalcifying or rinsing aperture of the boiler is under pressure and must not be opened. [. . . ] 1 “PulseSteam” function This appliance has a special function for tackling difficult creases. the “PulseSteam” function helps soften stubborn garments like jeans or linen faster. When the steam release button is activated, the steam generator will release three powerful shots of steam so that the steam reaches even deeper into the fabrics. Briefly press the steam shot button (18*) on the top of the handle. Or (model dependent) Press the steam release button (17) on the bottom of the handle two times in quick succession (double-click). Remarks: • It is possible to stop the shots of steam by quickly pressing the steam button again. € Some water drops may appear when you use the “PulseSteam” function for the first time. The water drops will disappear after you have used the function for some time. Energy saving button* If the “Energy saving” button (8*) is switched on, you can save up to 25% of the energy and 40% of the water consumption (*), and still achieve good results when ironing most of your garments. It is advisable to use the normal energy setting only for thick and very wrinkled fabrics. (*) In comparison to the maximum setting. Note: If you work with the “Energy saving” function, the variable steam regulation and temperature regulation can still be used as recommended. 18 BOSCH * Model dependent Auto shut-off * If during ironing, the steam release button (17-18*) on the iron handle is not pressed for a certain length of time (8 minutes), the steam station will automatically switch off. The “auto shut-off” pilot lamp (9) will flash when auto shut-off has been activated. To switch the steam station back on, press the steam release button again. Automatic clean warning Pilot light (12*) will flash indicating that boiler must be rinsed. 1 Check carefully that the appliance is cold and unplugged for more than 2 hours, and that the water tank (1) is empty. 2 Model dependent: Fix the iron to the stand by inserting the tip of the iron into the front slot and moving the fixation lever (14*) against the heel of the iron. 3 Place your appliance over a sink or bucket. 4 Lean the appliance on the opposite side of the filter opening. 5 Unscrew the filter (4*) and take it out. 6 Model dependent: To wash the scale collector, place it under the water tap and wash it up until calc residues are removed. [. . . ] The selected temperature is too high and has damaged the garment. This is a regular consequence of continued use over a long period of time. Water is being pumped into the steam tank. * Model dependent BOSCH 21 Problem Loss of pressure during ironing. [. . . ]