User manual BOSCH SENSIXX COMFORT MAGIC

[. . . ] To release the fabric protector, pull down on the clip at the rear and remove the iron. The fabric-protection soleplate cover may be purchased from the customer service or specialist shops : Accessory code (After-sales) 464851 Name of accessory (Specialist outlets) TDZ1510 After ironing Switch the steam control from 0 to 2 and back again several times (self- cleaning). Empty the tank: Hold the iron with the point down and shake lightly. Store standing on the rear, not on the base (Fig. [. . . ] This appliance is intended for domestic and not industrial use. Keep the operating instructions in a safe place!Remove any label or protective cover from the soleplate Fill the tank of the iron with tap water and set the temperature control to “max”. When the steam iron has reached the desired temperature (pilot light goes out), let the water create steam by setting the steam control to 2 and by repeatedly pressing the button . During it first use the iron may produce certain vapours and odours that will die away after a few minutes. Lf the iron is only slightly soiled, pull out the plug and allow the soleplate to cool down. Wipe the housing and the soleplate with a damp cloth only. Lf synthetic cloth melts due to too high temperature on the stainless steel soleplate, switch off the steam and rub off the residue immediately with a thickly folded, dry cotton cloth. To keep the soleplate smooth, you should avoid hard contact with metal objects. Never use a scouring pad, or chemicals to clean the soleplate. Never decalcify the tank or treat it with detergents or solvents: otherwise the iron will drip water whilst steaming!Any damage caused by the use of the aforementioned products, will make the guarantee void. Do not use condensation water from tumble dryers, air conditionings or similar. This appliance has been designed to use normal tap water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Never fill beyond the “max” water level mark. 1 Depending on the model, this range is equipped with the “AntiCalc” (=component 1 + 2). Self-clean Each time you use the steam regulator, the “self-clean” system cleans the mechanism of scale deposits. Anti-calc The “anti-calc” cartridge has been designed to reduce the build-up of scale produced during steam ironing, helping to extend the useful life of your iron. Nevertheless the “anti-calc” cartridge cannot remove all of the scale that is produced naturally over time. For improved de-scaling, heat up the iron again fully and press the shot of steam button several times in quick succession. [. . . ] Then wait until the remaining water has evaporated from the soleplate of the iron. Triez le linge en fonction des symboles d’entretien puis commencez par le linge repassable à la plus basse température ‘•’: “Secure” auto shut-off function Ironing without steam Ironing with steam Set steam control to the "0" position. 3 (Depending on model) The “Secure” auto shut-off function switches off the iron when it is left unattended, thus increasing security and saving energy. After plugging in the appliance, this function will be inactive for the first two minutes in order to give the appliance time to reach the set temperature. [. . . ]