User manual BOSCH SGV09T13EU

[. . . ] Household Appliances 9000 073 169 (8503) en Instructions for Use Internet:http://www. bosch hausgeraete. de Bosch Info Team: DE Tel. DTAG) en Index 4 6 7 8 9 10 11 12 15 auto 3in1 . Selecting options/standard settings Maintenance and care . 17 19 20 21 22 28 30 33 34 35 36 Safety instructions . [. . . ] Until the programme starts you are able to change the set time and programme. To do this, use the button ­ 3 to return to the Main Menu and change the settings. In order to delete the pre-selected time, set the time back to "Delay start: 00 mins". Drying Level If the option "Drying Level" is chosen the display shows "Normal drying" (factory setting). Alternatively you can select "Eco drying" or "Extra drying". The option "Extra drying" increases the temperature during rinsing in all programmes. (Please take care with delicate dishes. ) 23 en Buzzer Volume You can vary or even completely switch off the volume of the acoustic end-of-programme signal. If the option "Buzzer Volume" is chosen the display shows "Buzzer 6" (factory setting). You can change this value to 0 (acoustic signals switched off) or to values between 1 (quiet) and 6 (loud). A short buzz demonstrates the currently chosen volume level. Water Hardness Before starting the appliance for the first time or in case of changes in the water hardness, the dishwasher's softening system must be set to the hardness of your mains water supply. Follow the instructions set out in the chapter "Set-up of the Softening System". Language You can change the language selected when the appliance was started for the first time (see chapter "Before Starting The Device For The First Time"). If the option "Language" is chosen the display shows several language abbreviations. The abbreviation of the currently selected language is flashing. In order to choose a different language, press ­ or + 3 until the desired language appears. Confirm the language selection by pressing M/OK 2 . All following optical character messages will be displayed in the selected language. Adding Rinse Aid You can set the amount of rinse aid added. If the option "Adding Rinse Aid" is chosen the display shows "Rinse Aid 4" (factory setting). Change this setting only if there are streaks (reduce the value) or water stains (increase the value) remaining on the dishes. You can choose a value between 0 and 6. 24 en Standard Programmes In addition to the rinse programmes available in the Main Menu you can choose among the following standard programmes from the programme "Normal": Extra, Eco 50, Eco 45, Normal 45. Set the desired programme and start the selected programme by pressing the Start Button 4 . If you do not want to use any of the displayed standard programmes return to the Main Menu by using the button M/OK 2 . Extra If you want to cancel the selection of a standard programme in the Main Menu press the button ­ "Back". The selected standard programme will be displayed. By pressing the buttons ­ or + the Main Menu will display the programme "Auto Wash". Eco 50 Eco 45 Normal 45 Type of Dishes Amount of food remnants State of food remnant Mixed Dishes Little to Many Lightly Adhesive You can find the corresponding programme data (length of time, energy and water consumption) in the short manual. [. . . ] Otherwise, residual water may penetrate the control and damage the appliance. Protection from freezing temperatures If the appliance is installed in a location where there is a risk of freezing temperatures (e. g. in a holiday home), all water must be completely drained out of the interior (see "Transporting the dishwasher"). Turn OFF the tap, disconnect the supply hose and allow to drain. 36 en Disposal of the packaging Please dispose of the packaging material in an environmentally friendly manner. Keep children away from shipping carton and packaging components. [. . . ]