User manual BOSCH SHV09T33EU

[. . . ] Dishwasher 9000 256 396 (8704) en Instructions for Use en Index 4 6 7 8 9 10 11 14 16 serve@Home * . Selecting options / standard settings Maintenance and care . 17 18 19 20 25 27 30 30 31 33 Safety instructions . Before using your appliance for the first time . [. . . ] If the onboard computer option is selected, "Onboard computer off" is displayed (factory setting). If you no longer wish additional information to be displayed during the next rinse cycle, you must switch the option off again. Water Hardness Before starting the appliance for the first time or in case of changes in the water hardness, the dishwasher's softening system must be set to the hardness of your mains water supply. Follow the instructions set out in the chapter "Set-up of the Softening System". Interior light * 20 Drying Level If the option "Drying Level" is chosen the display shows "Normal drying" (factory setting). Alternatively you can select "Eco drying" or "Extra drying". The option "Extra drying" increases the temperature during rinsing in all programmes. (Please take care with delicate dishes. ) If the interior light option is selected, "Interior light: On" is indicated on the display (factory setting). You can switch the interior light on or off. The avtivated interior light comes on when the door is open, irrespective of whether the main switch is on or off. When the door is closed or ajar, the light is off. * some models 21 en Language You can change the language selected when the appliance was started for the first time (see chapter "Before Starting The Device For The First Time"). If the option "Language" is chosen the display shows several language abbreviations. The abbreviation of the currently selected language is flashing. In order to choose a different language, press ­ or + 3 until the desired language appears. Confirm the language selection by pressing M/OK 2 . All following optical character messages will be displayed in the selected language. Standard Programmes In addition to the rinse programmes available in the Main Menu you can choose among the following standard programmes from the programme "Normal": Extra, Eco 50, Eco 45, Normal 45. Set the desired programme and start the selected programme by pressing the Start Button 4 . If you do not want to use any of the displayed standard programmes return to the Main Menu by using the button M/OK 2 . If you want to cancel the selection of a standard programme in the Main Menu press the button ­ "Return". The selected standard programme will be displayed. By pressing the buttons ­ or + the Main Menu will display the programme "Auto Wash". Eco 50 Eco 45 Normal 45 Extra Type of utensils Amount of food remnants State of food remnants Mixed Dishes Little to Many Slightly adhesive You can find the corresponding programme data (length of time, energy and water consumption) in the short manual. We recommend on principle to use the Auto Programmes because they keep the water and energy consumption as low as possible due to the variable programme run. In the case of the standard programmes on the other hand, the programme run is predetermined. 22 en Remote Options ** The dishwasher installs itself automatically during the first use within a serve@Home network. [. . . ] Dispose of the appliance in an environmentally friendly manner. Warning Children could become locked in the appliance (risk of suffocation) or find themselves in other dangerous situations. Therefore: Pull out the mains plug, sever and dispose of the power cord. Destroy the door lock so that the door can no longer be closed. Disposal of the packaging Please dispose of the packaging material in an environmentally friendly manner. [. . . ]