User manual BOSCH SMS50E06EP

[. . . ] en Dishwasher summary of instructions Brief and handy: everything your dishwasher needs . . . Before using for the first time, read the operating instructions! Adjusting the water softening system * Ask your water supply company what the water hardness is and enter . . . Quickly sorted . . . How to adjust the water softening system AB ­ Switch on ON/OFF switch. [. . . ] is obtained by increased energy consumption at a constant cleaning and drying performance. for a few items, saves water, energy and time Flexibility . . . IntensiveZone . . . Washing pressure and washing temperature are increased slightly. The temperature is increased during the rinsing process. improves the drying result by increased temperature in the final rinse (Please take care with delicate dishes) Switch off the appliance Everything o. k. . . . ** depending on model Maintenance and care Filters . . . check, if required clean Rotate filter cylinder, remove filter system . . . For perfect rinsing results . . . rinse under running water . . . Screw on filter system NOTE MARK! Cleaning waste water pump ­ Pull out the mains plug ­ Remove filters and scoop out water ­ Lever off cover (­­>A) ­ Check area around the fan impeller for foreign objects ­ Click cover shut (­­>B) ­ Insert filters Spray arms . . . Remove blockages/deposits pull lower arm upwards . . . unscrew upper arm . . . clean spray nozzles under running water (if required use toothpicks) . . . insert lower arm . . . A B screw on upper arm tightly Rectifying minor faults yourself . . . Fault Possible causes . . . as it is worth doing it yourself! Remedial action Fault Utensils are not clean Sand or gritty residue on the utensils Possible causes Utensils are situated close together or one above the other Too little detergent Unsuitable programme selected Spray arm nozzles blocked Filters dirty, not seated firmly Spray arms blocked Remedial action Separate the utensils, prevent contact points. Follow manufacturer's instructions (detergent). Arrange the utensils so that the spray arms can rotate freely. Display " " display is lit Supply fitting jammed or calcified Open supply fitting. [. . . ] The numerical display indicates "0:01" approx. 1 minute after the programme ends, 0:00 is indicated Switching off the appliance Loading the dishwasher correctly . . . Dishwasher-proof utensils (not soiled with ash, wax, lubricating grease, ink or adhesive labels; remove large remnants of jam, milk products and food according to the operating instructions and check that the spray arms can rotate freely. [. . . ]