User manual BOSCH TAT8613GB

[. . . ] 7 Preparing and sorting the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Detergents and care products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Washing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 What to do if. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 After-sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Table of programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Consumption rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Installation instructions Appendix Please read the installation and operating instructions and all the other information supplied and handle the appliance accordingly. [. . . ] The water is emptied but the washing machine does not spin. The programme has finished when the terminado (finished) indicator light flashes. Set the programme selector to Stop (Off). Leave the loading door open in order that the inside of the washing machine can dry. Programme change You have selected an incorrect programme by mistake: Select the programme again and press % Inicio/Pausa (Start/Pause). The new programme starts from the beginning. 13 Adding laundry If you want to add laundry after the programme has started, press and hold the % Inicio/Pausa (Start/Pause) button until the lavar (wash) flashes. The washing machine checks whether adding laundry is possible. Select the % Inicio/Pausa (Start/Pause) button to continue the programme. Note: If the water level and/or temperature is high or if the machine is spinning, the loading door remains locked for safety reasons. Press and hold the % Inicio/Pausa (Start/Pause) button until all three programme progress lights light up. To continue the programme, select the % Inicio/Pausa (Start/Pause) button. Press and hold the % Inicio/Pausa (Start/Pause) button for three seconds. Fold up the servicing panel and remove it upwards. Draining the water Remove the drain hose from its retainer. Remove the sealing cap from the drain tube and allow the water to drain off. ­ The container for the drained water may have to be emptied several times. ­ When no more water emerges, refit the sealing cap. Place the drain hose into the retainer. Cleaning the detergent solution pump Carefully unscrew the pump cover (remaining water). ­ Clean the interior, pump cover threads and pump housing (it must be possible to turn the impeller). Replace the pump cover and screw it down. Place the servicing flap into the 4 clip-in slots and fasten to the housing with the lock pin. i To prevent detergent flowing unused into the outlet the next time laundry is washed: Pour 1 litre of water into compartment II and start the Empty programme. 16 Filter in the water inlet *Water inlet hose depending on model If no water, or an insufficient amount of water, runs into the washing machine, first release the water pressure in the inlet hose: Turn off the water tap. Select any programme (except O / C (Rinse + Spin) / [ (Empty). Press the % Inicio/Pausa (Start/Pause) button. Allow the programme to run for approximately 40 seconds. [. . . ] Note the water pressure in the mains supply: ­ The water pressure should be between 50-900 kPa (0. 5-9 bar) (at least 8 litres of water per minute flow when the tap is open). ­ If the water pressure is higher, a pressure reducing valve must be installed. Connect the inlet hose to the ¾" cold water tap. Tighten the screw connections only by hand. [. . . ]