User manual BOSCH TDS3570GB

[. . . ] • During later use: the sole plate may be soiled. • Clean the sole plate according to the cleaning instructions in this manual. Water flows through • The steam function is being used • Reduce the steam flow when the holes on the sole before it has reached temperature. ironing at low temperatures plate. • The water is condensing inside the • Point the iron away from the pipes because steam is being used ironing area and press the for the first time or has not been steam release button (15) until used for a long time. Dirt comes out • There is a build-up of scale or • Mix tap water with distilled through the sole minerals in the steam tank. water 1:1. [. . . ] • With the aim of avoiding dangerous situations, any work of repair that the appliance may need, e. g. replacing a faulty mains cable, must only be carried out by qualified personel from an Authorized Technical Service Centre. • Never immerse the iron or steam tank in water or any other liquid. • The appliance must never be placed under the tap to fill it with water. • Children should be supervised to ensure that they do not play with the appliance. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. • This appliance reaches high temperatures and produces steam during use, this could cause scalds or burns. • If the safety fuse fitted in the appliance blows the appliance will be rendered inoperative. To restore normal operation the appliance will have to be taken to an authorised Technical Service Centre. • Never aim the steam at people or animals. • The appliance must be used and placed on a stable surface. When placed on its support, make sure that the surface on which the support stands is stable. • Do not use the iron if it has been dropped, shows visible signs of damage or if it is leaking water. It will have to be checked by an authorised Technical Service Centre before it can be used again. • Do not allow the cord to come into contact with the soleplate when it is hot. • The iron pad (2) can be placed into the specially designed recess on the appliance or somewhere suitable alongside the ironing area. Never rest the iron back on the steam generator without the iron pad!. Description 1. Removable water tank 2. Removable iron pad 3. ”Water empty”/ “Clean warning (*)” pilot light 4. ”Steam ready”/ “Auto shut-off (*)” pilot light 5. Variable steam control 6. «Energy saving» button (*) 7. Steam hose 8. Illuminated main power 0/I button 9. Housing with internal steam generator 10. Mains plug 11. Mains cable with storage facility 12. Steam hose clip 13. Temperature dial 14. Iron pilot light 15. Iron steam release button 16. Soleplate 17. “Calc’n clean” opening Getting Started 1. Remove any label or protective covering from the soleplate (16). 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Remove the detachable water tank (1) and fill it, making sure not to overfill it. 4. Press the steam release button (15 ) to release steam. Additional features (Model dependent) Intelligent steam Important: 4. Fit the water tank back onto the steam tank. 5. Unwind the mains cable fully and plug it into an earthed socket. [. . . ] 3. Place the iron on the iron pad, standing it on its sole plate (16). 4. Empty the water tank (1) and store/wrap the mains cable onto the cord storage facility (11). Tidy the steam hose (7) onto the handle of the iron using the steam hose clip provided (12). Do not wrap the cords too tight Advice on disposal Our goods come in optimised packaging. [. . . ]