User manual BOSCH WFL2060UC-II

[. . . ] Axxis WFL 2050 Axxis WFL 2060 am Operating, Care and Installation Instructions 2 Table of Contents IMPORTANT SAFETY INSTRUCTIONS . 4 Operating Instructions Disposal Information . Environmental Protection / Conservation Issues . Preparing, Sorting and Loading the Laundry . [. . . ] Use this setting to avoid wrinkles, when the clothing cannot be taken out of the washing machine immediatly upon completion of the cycle. Before the laundry can be unloaded, the Drain or Spin program must be performed. Washing q Turn on the water taps. 15 q Turn the program selector to the desired program. The ready control light is flashing. q Where required, press the option button(s) for additional function(s). q Select the desired spin speed or no final spin. q Press the Start button. The wash control light comes on, and the program starts. The wash control light changes during the program to rinse/spin. 16 Soaking The Soak setting is used to pre treat heavily stained items: q Load laundry of the same color. q Add the soaking agent to chamber I according to the manufacturer's specifications. The wash control light comes on, and the program starts. i Changing a program If you have accidentally selected the wrong program: q Turn the program selector to Off. q Turn the program selector to the desired program. The wash control light comes on, and the new program starts. The soak cycle lasts 2 hours with a maintained temperature of 60 °F / 15 °C . All the water is pumped out. Cancelling an active program If you wish to prematurely end a program: q Turn the program selector to Off. q Turn the program selector to Drain or Spin. The ready control light is flashing. Bleaching WARNING DO NOT use chlorine bleach in this washing machine. For Spin, select the desired spin speed (but not no final spin). The wash control light comes on, and the program starts. Decolorizing CAUTION Decolorants may contain sulphur or chlorine. These substances can cause parts of the wash ing machine to corrode. Do not decolorize items of laundry in the washing machine. 17 Unloading the laundry When the Program has Ended The finished control light is flashing. When the door locked control light goes off: q Turn off the water taps. q Turn the program selector to Off, and, when required: q Select a program (Drain or Spin). The wash control light comes on, and the program starts. The wash control light changes during the program to rinse/spin. q At the end of the program option, turn the program selector to Off. If the loading door cannot be opened: Wait for 2 minutes (the safety function is active) or there is still water in the washing machine if the no final spin option was selected. In this latter case, select the Drain or Spin program. q Unload the laundry. CAUTION Check occasionally for any foreign objects (e. g. coins, paper clips) from the drum and rubber seal) - risk of rust! [. . . ] In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING CAUTION The plug must not block the drain of the wash basin. q Secure the water drainage hose so that it does not slide out. [. . . ]