User manual BOSCH WVD2452BGB INSTALLATION INSTRUCTIONS

[. . . ] Safety instructions – The washing machine is heavy – take care when lifting it. – Warning: Frozen hoses may tear/burst. Do not install the washing machine outdoors and/ or in areas where there is a risk of frost. – The washing machine may be damaged. [. . . ] All four appliance feet must be placed firmly on the floor. The washing machine must not be able to shake. Use a spirit level to check the alignment of the washing machine and correct it if necessary. A damaged power cord must be replaced by an electrician only. Replacement power cords are available from after-sales service. Do not use multiple plugs/connectors or extension cables. If a residual current-operated circuit-breaker is used, use only a type which guarantees compliance with the regulations that are currently valid. Mains plug: – Do not insert into/pull out of the socket with damp hands. – Do not pull the plug out of the socket by tugging the cable. – Never pull the plug out while the appliance is operating. 2. Installing transport bolts For WM, WAX, WAE series Remove the four covers (C). Remove the rear cover (D) and prepare the transport bolts. Insert and tighten the transport bolts. D Installation instructions C 3. Tighten the lock nut against the housing. Hold the foot in place and make sure that the correct height is maintained. The lock nuts on all four appliance feet must be screwed tightly against the housing. For WS, WLX, WLG series Remove the four covers. Pull the bolt out of the sleeve until the end of the bolt is flush with the end of the sleeve. The lug on the washer must be located in the groove in the rear cover. Contents Safety instructions . . The transport bolts must be removed after transportation. To prevent unused detergent from flowing into the outlet during the next wash: Pour 1 litre of water into dispenser II and start the Empty (Drain) or Spin programme. Page . . . 1 . . . 1 . . . 1 . . . 1 . . . 2 . . . 2 . . . 2 . . . 3 . . . 4 . . . 5 . . . 6 . . . 7 Read the installation instructions before switching on the washing machine. Also follow the separate instruction manual. Retain all documents for subsequent use or for the next owner. Manufacturer (see Instruction Manual) 0212/9000659503 5 6 7 Safety instructions – The washing machine is heavy – take care when lifting it. – Warning: Frozen hoses may tear/burst. [. . . ] Replacement power cords are available from after-sales service. Do not use multiple plugs/connectors or extension cables. If a residual current-operated circuit-breaker is used, use only a type which guarantees compliance with the regulations that are currently valid. Mains plug: – Do not insert into/pull out of the socket with damp hands. [. . . ]