Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BOSE 201 IV. We hope that this BOSE 201 IV user guide will be useful to you.
Lastmanuals help download the user guide BOSE 201 IV.
Detailed instructions for use are in the User's Guide.
[. . . ] You may find this best for music recorded in live settings. Your 201 Series IV speakers are significantly different from conventional ones, so be sure to read this owner's guide. It will help you set up and use your speakers properly, for the greatest enjoyment. Carefully unpack the carton and save all packing materials for possible future use. [. . . ] Refer to the wire recommendations under "Technical information" on page 10, or contact your authorized Bose® dealer for more information. Note: This wire may not be suitable for use inside finished walls. Check your local building code requirements or contact an electrical installer for information. This marked wire is always positive (+). At the ends of each cord, strip approximately 1/2 inch (12 mm) of insulation from both wires. Twist the bare end of each wire, so loose strands will not touch across terminals. Be sure to connect each wire to the proper terminal (positive to positive and negative to negative). Caution: Before making any connections, turn off your receiver or amplifier and unplug it from the AC power (mains) outlet. Not doing so may result in damage to your system. Just press the terminal tab on the back of each speaker to insert the appropriate wire (Figure 4). Connect the other end of the same cord to the RIGHT SPEAKER OUTPUT of your receiver. Connect the second cord to the left speaker and LEFT SPEAKER OUTPUT as described above. Make sure that no loose strands of wire touch across terminals. This could damage your receiver or amplifier. Be sure the connections are secure before you plug in the receiver or amplifier and turn it on. To make sure your speakers operate correctly: 1. Place the speakers less than 6 inches (15 cm) apart, facing each other. Turn on your receiver, and set it to MONO (monophonic), if that is an option on your model. Play some deep bass passages of music through the speakers. The sound should seem to come from a point between the two speakers. If it is not, one of the connections may be reversed, causing the speakers to play out of phase. refer to "Make the connections" on page 6. [. . . ] Details of the coverage are provided on the warranty card that came with your speakers. Please fill out the information section of the card, detach, and mail to Bose. If you have a problem not solved by the troubleshooting guidelines, contact your authorized Bose dealer to arrange for service. To obtain information or service directly from Bose, refer to the listings inside the back cover of this guide. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSE 201 IV
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSE 201 IV will begin.
