User manual BOSE LIFESTYLE RC-38S

[. . . ] Bose LIFESTYLE RC-38S Remote Control ® ® Owner's Guide and Bose® Link Expansion Overview Guía del usuario y Bose® Link: Información general de ampliación Notice d'utilisation et présentation de la télécommande d'expansion compatible avec un réseau Bose® Link Introduction Thank you for choosing the RC-38S remote Introduction English As the owner of a Bose® LIFESTYLE® RC-38S remote control, you can enjoy a wide variety of new options with your LIFESTYLE® DVD home entertainment system. This remote is one of many Bose® link compatible products designed to work with the LIFESTYLE® 38 or 48 systems. Built-in compatibility makes this additional remote useful in any area of your home. . . wherever you want to hear Bose quality sound from your system! Español Where to use this expansion remote Français Using the RC-38S remote in another room, you can turn your LIFESTYLE® system on and tune in audio from the the media center located in the main room. You can even select a different sound source, changing from CD to FM radio, or access the uMusicTM intelligent playback system. [. . . ] To purchase the Extension/Expansion cable from your authorized Bose dealer, ask for Part Number 275475-050. Or, to contact Bose directly, refer to the address list provided with your LIFESTYLE® system. 6 Preparing the Remote Getting the remote ready to use Preparing the Remote You can use your RC-38S remote control as soon as the batteries are installed. It is pre-set at the factory for use outside the main room where your LIFESTYLE® system is located, in an area where another Bose® system or speaker pair is set up. Or, you can use it as a secondary remote in the same room with the LIFESTYLE® system instead. To learn how to set switches inside the battery compartment for that purpose, refer to "How to change the settings, as needed" on page 17. English Español Français To install batteries 1. Slide the battery cover off the back of the remote. Note: You may notice the small switches just above the batteries inside the compartment. These are the house code, stream selection, and room code switches, explained on page 12. As you install the four supplied batteries, match the polarity markings (+ and ­) on each one to markings inside the battery compartment (Figure 2). Figure 2 Polarity marked on the batteries + + + + 3. Slide the battery cover back into place until it snaps closed. Note: If you notice a decrease in the range or response of the RC-38S remote control, the batteries may need to be changed. 7 Preparing the Remote What each button does English Styled after the primary remote, which is packed with the media center, the RC-38S remote has similar buttons. System ON, OFF, silenced Turns the system on and off. Mutes the volume for all connected speakers (main and in other rooms). Mutes or unmutes the volume in the current room. Français Español Select the source Selects the audio source located in the room where the remote is designated for use. Also switches between the local source inputs. Turns the system on and selects the source connected to the TV input on the media center. Turns the system on and selects the source connected to the CBL/SAT input on the media center. Turns the system on and selects the source connected to the VCR input on the media center. Turns the system on and selects the uMusicTM intelligent playback system mode of stored CD play. Turns the system on and selects the built-in disc player as source. While it cannot turn these components on or off, it can change the volume, start or stop play, and control other basic operation. Note: With a CD changer connected to your LIFESTYLE® system, commands from the RC-38S remote can affect the current CD, but cannot change to another CD. English Español Two streams, two choices for you When you set up speakers in another room, you have some choices for what those speakers will play. Your LIFESTYLE® system provides an exciting set of options for you by offering two independent audio streams. So, even when you are in the other room, you can choose to listen to whatever is playing in the main room, or to another audio source that's part of the system. Two streams are simply the means to these added choices. [. . . ] If you ever use this option, the changed house code must be applied to any expansion remote controls used with this system, too. At the factory, each RC-38S remote has its remaining switches set: · To receive audio stream 2 (switch 5) · To be used in Room B (switches 6-9) To check the settings in your new remote, remove the battery cover to see the small switches just above the batteries. 16 Code Switch Setting How to change the settings, as needed Use a fine-pointed pen or other small tool to move each switch to its new position. First check the house code setting (switches 1-4) Make sure that the first four switches on the left, as you face them, match the house code settings in your primary remote. For more details on these switches, refer to the Operation Guide provided with your system. [. . . ]