User manual BOSE LIFESTYLE SA-3 STEREO AMPLIFIER

[. . . ] The Bose® Lifestyle® SA-2 and SA-3 Stereo Amplifier Owner's Guide Safety Information WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. C AU TI ON AUT I RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Insert the other end of the Bose® link A cable, into the Bose® link input jack on the rear panel of the Lifestyle® stereo amplifier. Figure 7 Lifestyle® stereo amplifier to AV-28 media center connections Lifestyle® stereo amplifier rear panel AV-28 media center rear panel BoseLink OUTPUT BoseLink INPUT 8-to-9-pin DIN adapter 20-ft Bose® link A cable 13 Setting Up Your Lifestyle® Stereo Amplifier Setting up the RC28S remote Your second remote is shipped from the factory already set up for Zone 2. To make sure that this remote will work with your home entertainment system, do the following to check the house code setting. Remove the remote control battery cover and locate the microswitches (Figure 8). Make sure that the house code settings (switches 1, 2, 3, and 4) match the house code settings in your main room remote. Make sure switches 5, 7, and 8 are up, and switches 6 and 9 are down. Note: Refer to your Lifestyle® system owner's guide for more information on operating your system in more than one room. Figure 8 Remote microswitches House code switches must match main room remote ON Setting the Zone 2 Protocol in your home entertainment system For the Lifestyle® stereo amplifier to work properly with a Lifestyle® media center, you will need to set the Zone 2 Protocol to Legacy mode (Figure 9). Turn on your Lifestyle® DVD system and your TV. Press the Settings button on your main room remote control. Scroll down the menu to System Setup and press the Enter button. Scroll down the menu to the last item, Zone 2 Protocol. Press the right arrow remote button to change the protocol from Normal to Legacy. Turn the system off and on again to ensure that the Zone 2 Protocol is reset to Legacy. Figure 9 On Off Mute All SOURCE / INPUT Mute Settings ( ) System Setup (3 of 3) Setting Zone 2 Protocol CD/DVD Changer TV FM/AM VCR AUX MENU / NAVIGATION Settings Tune Disc Settings Seek Enter Channel Chapter Preset Track Volume 1 4 7 2 5 8 0 PLAYBACK 3 6 9 Stop Pause Play Shuffle Repeat System Setup Enter Zone 2 Protocol: Legacy 14 Setting Up Your Lifestyle® Stereo Amplifier Multi-room interface setup CAUTION: Before making any connections, turn the Lifestyle® system off and disconnect the music center from the AC (mains) power outlet. DO NOT plug the amplifier into an outlet until you have completed all other connections. Insert the 8-to-9-pin adapter into one of the unused ROOM output jacks (B, C, or D) on the rear of the multi-room interface (Figure 10). Insert one end of the Bose® link A cable into the 8-to-9-pin adapter. Insert the other end of the Bose® link A cable, into the Bose® link input jack on the rear panel of the Lifestyle® stereo amplifier. Figure 10 Lifestyle® stereo amplifier to multi-room interface connections Lifestyle® stereo amplifier rear panel Multi-room interface rear panel BoseLink OUTPUT BoseLink INPUT 8-to-9-pin DIN adapter 20-ft Bose® link A cable 15 Setting Up Your Lifestyle® Stereo Amplifier Setting up the Personal® music center Systems that have a multi-room interface are controlled by the Personal® music center which requires no internal switch settings before it allows you to control more than one room of speakers. However, if you purchase a second Personal® music center, you must follow the procedure for setting up the Personal® music center for the first time. Note: Refer to your Lifestyle® system owner's guide for more information on operating your system in more than one room. Selecting other rooms with the Personal® music center The Personal® music center allows you to control up to four sets of Bose® powered speakers placed in individual rooms. [. . . ] · Check the speaker cable connections to be sure the cable connected to the SPEAKER OUTPUTS L at the amplifier are connected at the other end to the speaker on the left in your listening area. · Check the speaker cable connections to be sure the cable connected to the SPEAKER OUTPUTS R at the amplifier are connected at the other end to the speaker on the right in your listening area. Only one speaker plays One speaker still does not play Right and left stereo channels are heard on the wrong speakers. 27 Maintaining Your Lifestyle® Stereo Amplifier Problem Bass or treble is weak Interference What to do · Check the speaker wire connections. Make sure the wires are connected + to + and ­ to ­. · See "Connecting speakers to your Lifestyle® stereo amplifier" on page 21. [. . . ]