User manual BOSE LIFESTYLE DVD

[. . . ] Please take the time to follow the instructions in this guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. Please save this guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. [. . . ] Move right into the list of choices and up or down to select a different setting: !TV Not Detected means the TV sensor (if installed) is not connected or not positioned properly. SAT input on your media center is the one you should select. so when you press the CBL· SAT source button and the On/Off button below it, you are operating that device. If you own both a cable and satellite box, use the AUX option to designate the second device brand and code. note: For general guidelines on using the LIFESTYLE® System menu , refer to "Using System Menus" on page 27. Follow the cable or satellite process below: Turn on the cable or satellite box (or other video device) that is connected to the CBL· sAT Audio IN on the media center. Turn on the TV and be sure to select the TV video input that is connected to the media center. Move right and select a device from the multiple options by pressing Enter. Move to the right and up or down in the alphabetical list to locate your brand. From the menu options on the left, select CBL· Move right to select the first code. If the cable or satellite box turns off and on, you have chosen the right code. If not, select another code, and press the CBL· When you complete these settings, you can use CBL· SAT On/Off to turn on your cable or satellite source, and use other LIFESTYLE® remote buttons to operate it. If you have both a cable and satellite box, use AUX to connect the second device and to select it as the source. By following the instructions below, you can set the remote to control one or the other, but not both. If you have both a VCR and a DVR, set up one as VCR and the other as AUX. Follow the VCR process below: Turn on your VCR or other video recorder. Turn on the TV and be sure to select the Video input on the TV for the media center. Then, using the LIFESTYLE® remote control, press the VCR source button and follow the steps below. Move right and select a device from the multiple options by pressing Enter. Move right into the list of brands and up or down to locate your brand of VCR or DVR. If the VCR or DVR turns off and on, you have chosen the right code. [. . . ] Move antennas farther from media center, TV, or other electronic equipment. You may be in an area of weak signal coverage for some stations. After pressing the CD/DVD button, wait a few seconds before pressing Play. The CD may be defective or not compatible. [. . . ]