User manual BOSE LINK AL8

[. . . ] BOSE Link AL8 ® HOMEWIDE WIRELESS AUDIO LINK Français Español English SAFETY INFORMATION Please read this owner's guide Please take the time to follow the instructions in this owner's guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. Please save this owner's guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. [. . . ] · Keep the two units within 80 feet (24 meters) of each other. · SBe aware that the strongest signal direction is above and around, not below, the transmitter. 5 Français Español English SETUP Making the connections You can connect one transmitter and up to 8 receivers for each LIFESTYLE® system. The transmitter and receiver each use one of the two supplied Bose® link A cables, which are 7 feet (2 meters) long. Each unit also connects to power using one of the two supplied power packs. Note: Instructions for use with a non-Bose tuner/receiver vary slightly from those below. For details, refer to "Instructions for non-Bose or older Bose products" on page 7. For the transmitter 1. Connect one end of a Bose link A cable to the jack labeled Bose® link INPUT on the transmitter connection panel. Connect the other end of the cable to the Bose link speaker jack, below the Main Speaker jack, on the LIFESTYLE® media center connection panel (Figure 3). Status LED Figure 3 Transmitter connecting to a LIFESTYLE® media center AC Power Transmitter Bose link A cable LIFESTYLE® media center Main Speaker jack Bose link Speaker jack Bose link INPUT ® Note: If another product is already connected to the Bose link Speaker jack on the media center, disconnect it there. You can use the wireless audio link to replace this wired connection. An adapter kit, which contains two of these cables, is available from Bose. Note: To order the adapter kit, contact Bose and request Part Number 285320-207. For Bose contact information, refer to the address sheet included in the carton. To use an adapter cable The RCA connectors are color coded, red for right and white for left. Insert the adapter cable DIN connector into the Bose® link jack on the transmitter (INPUT) or receiver (OUTPUT) jack, as appropriate. Insert the adapter cable RCA connectors into the Audio Out jack on the connection panel of the audio source or the Audio In jack on the expansion room product. Match left to left and right to right. 7 Français SETUP Figure 6 Connections using the adapter cable Source Product Audio Output L R Expansion Room Product Audio Input L R Español English Transmitter Bose® link INPUT Adapter cable Receiver Bose® link OUTPUT Adapter cable 3. ­ ­ Complete the connections using the power pack: Insert the small plug on the power pack cable into the AC Power jack. Plug the pack into an AC wall outlet. The Status LED lights to verify this power connection. Note: For information on the meaning of the different Status LED lights, refer to "Check the indicators and settings" below. To control volume when a non-Bose product is the sound source: · There is no need for an expansion room remote control. · Use the remote that came with the tuner/receiver in the room where it is connected to the transmitter. · Use the volume control on the system, radio, or powered speakers connected to the receiver in the other room. [. . . ] If not, refer to the next Problem in this table. · For the expansion room products, make sure: ­ the system, amplifier, or powered speaker is plugged in and turned on. On an SA-2 or SA-3 amplifier in that room, make sure the status LED is lit to indicate the amplifier is working. ­ the room code is set on the Bose link remote control or PERSONAL® music center II to match the room codes on the amplifier or powered speaker and are unique to this expansion room. [. . . ]