User manual BOSE WAVE MUSIC SYSTEM

[. . . ] Wave Music System ® Owner's Guide ® A mark of quality Safety Information WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. WARNING: The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. [. . . ] To improve FM reception, you can install an external FM antenna. See "Connecting an external FM antenna" on page 16. 9 Listening to FM/AM Radio Storing a radio station to memory (Presets) 1 2 Presets 3 You can store up to six FM and six AM radio stations for quick recall using the Presets buttons. Tune to the station you want to save as a preset. Press and hold one of the six Presets buttons until you hear a double beep and the preset number and station frequency appear on the display. Press one of the Presets buttons to quickly tune to a previously stored FM or AM station. Note: Storing a preset will replace any station previously stored to that preset number. Note: During a power outage, stored presets are saved in a backup memory system for 48 hours. 4 5 6 TALK RADIO mode Talk radio broadcasts can be greatly affected by either the microphone selection or the boosting of low frequencies by some radio stations. They do so in an attempt to improve speech when heard through conventional radios. In high-quality audio products, this results in sound that is unnatural or bass heavy. By selecting the TALK RADIO mode, your Wave® music system automatically adjusts to compensate for artificially boosted low frequencies. Play Mode When the radio is playing, press Play Mode twice to turn the TALK RADIO mode on or off. When on, TALK RADIO­ ON is displayed. When off, TALK RADIO­ OFF is displayed. Note: The TALK RADIO setting is automatically cancelled when you tune to another station, switch to another source, or turn your Wave® music system off. 10 Playing Compact Discs Playing audio compact discs (CDs) Insert the disc, label side up, into the CD slot below the display. The disc player will automatically pull the disc in and begin playing. ® CD Press CD if the CD source is not selected. Note: ­ NO DISC ­ will be displayed if you press CD when there is no disc in the disc player. · When an audio CD is playing, CD source information is displayed: Selected source Play mode Track number Play / Pause Clock time Elapsed track time Press Play/Pause to pause a playing CD. Press Play/Pause again to resume play. Seek/Track Press Seek/Track to skip to beginning of the current track; press Seek/Track twice to skip to the beginning of the previous track; press Seek/Track to skip to the next track. Press and hold Tune/MP3 < to scan backward quickly through a track; press Tune/MP3 > to scan forward quickly through a track. Tune/MP3 Stop / Eject Press Stop/Eject to stop a CD. If a CD is playing, press and hold Stop/Eject to stop a CD and eject it. Note: When you play a stopped CD it will always resume from the place it was stopped. Note: If you eject a CD but do not remove it from the CD player slot within 10 seconds, the CD player will pull the CD back into the player, reload it, and not play it. CAUTION: DO NOT INSERT mini CDs or non-circular CDs into the disc player. These discs may not play properly and could interfere with the system's ability to eject them. CD Play Modes Play Mode While a CD is playing, you can change the way it is played. [. . . ] Check connections for an auxiliary source. Press AUX to listen to an external source connected to the AUX IN input. Make sure the external source is turned on. Operate the remote control closer to the unit. [. . . ]