User manual BOSE WAVE SOUNDLINK ADAPTER

[. . . ] Please take the time to follow the instructions in this owner's guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. Please save this owner's guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. [. . . ] Your Wave® system turns on and SOUNDLINK, CONNECTING, DISCOVERABLE appear in sequence on the front panel display. With your computer turned on, lift the antenna on the SoundLinkTM USB key to the vertical position and plug the key into a USB port on your computer. To locate a USB port on your computer, look for the identifying symbol . If you are using a USB hub with your computer, make sure it is a powered hub. Check to be sure the SoundLinkTM USB key power light turns on and begins to flash. Wait for your computer to recognize the SoundLinkTM USB key. It may take up to 20 seconds the first time this occurs. CONNECTING appears on the Wave® system display and lights on the USB key and SoundLinkTM adapter flash rapidly. The lights stop blinking and the Wave® system emits a brief beep when the SoundLinkTM connection is ready for use. For best performance, set your computer volume control to the maximum level you use. Then open a music application or locate an Internet radio station and set the music to play. Important for Mac computer users: On first using the USB key, you may need to open your computer Sounds settings in System Preferences and select "Bose SoundLink Audio. " Note: While listening to music from your computer, no sound plays through the computer's internal speakers or sound card. On some computers, you can choose a separate audio output for your music and still hear computer alerts on its internal speakers. To disconnect your Wave® music system from the computer Press the button on the end of the SoundLinkTM USB key. Then remove the USB key from the computer USB port. To reconnect to your Wave® system When you plug the SoundLinkTM USB key into the USB port on your computer, it should automatically reconnect to your Wave® system. Make sure your system is turned on and COMPUTER appears on the system display. If you have problems connecting, see "Troubleshooting" on page 11. Listening to music on your computer Your SoundLinkTM kit remote control gives you access to the music on your computer. It works much like the original Wave® music system remote and controls all of the system features. Press: Skips to the previous or next CD track or music track on your computer. [. . . ] Decrease the distance between the Acoustic Wave® system and your computer. Try moving the Acoustic Wave® system away from possible sources of interference such as another wireless device, a microwave oven, or wireless computer network router. Plug the USB key into the appropriate end of the cable and the computer into the other end. ⷠClose other applications that can tax your computer memory. [. . . ]