User manual BOSS BLX12C

[. . . ] Press RESET button. Stop Playing 34 Pause the Playback 34 Skip Backward/Forward/F. F/F. REW the Playback 34 System Switch 35 Slow Motion Playback 35 Increase Picture Size 35 On Screen Display 35 Setting the Playback Time 35 Selecting Channel 36 Selecting Title 36 Program Playing 36 RDS Setup 41 Alternative Frequencies 41 Traffic Alarm 41 Program Type 41 10 Bluetooth Mode Bluetooth Operational Interface 42 Using a Bluetooth Wireless connection 42 Pairing Your Unit and Bluetooth Phone 42 Pairing in Handsfree Mode 42 Cellphone Pairing Mode 43 Bluetooth Connection and Disconnection 43 Using the Unit as a Handsfree Device 43 Last Number Dialing 43 To Dial by Cellphone 43 To Dial by the Unit 44 Using the Unit as Bluetooth Music 44 Audio Transfer between The Unit and Phone 44 Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly. Make sure the antenna is fully extended; if broken, replace the antenna with a new one. The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location. The Video line from main unit to the TV is not connected properly. [. . . ] To get into CELL PHONE CONNECTION to search fixtures; 3. If the cellphone has connected, PAIRING SUCCESS appear and then CONNECTED in order, will from blue to red. If PTY is off, PTY OFF appears in the monitor, the searching is stopped. Note: * It is also performed by pressing During radio mode, press it to select the bands; During playback mode, press it to play or pause. [ / ]/[ / ]([Adjust frequency backward/Previous/The last phone, Answer a telephone]/[Adjust frequency forward/Next Track/Hangup, reject a call]) (ANGEL+) Button (ANGEL-) Button VOL+/ VOL-/SEL REMOTE Infrared Sensor RESET Button A/V IN Alternative Frequencies Briefly pressing 26 AF to activate the auto searching station function. When AF is on, the RDS signal is week or there is not, it will be found in the preseted frequencies and the whole bands. Note: * It is also performed by pressing 1 4 in the monitor. in the monitor. 8 41 09 Tuner Number Buttons During radio status, press Number Buttons to receive the stored stations. During radio status, Number Buttons (from 1 to 6) 23 can help you store your favorite station. You can follow the steps as below: 1 When receiving a station, press and hold any one of the Number Buttons (from 1 to 6) until the number appears on the LCD, which indicates that station is already stored in the corresponding number button. 2 Press and hold 4 AMS button to receive stations automatically, and store them in 1 to 6 number respectively. Before You Start Remote Control 26 1 3 4 19 20 25 24 6 5 8 27 18 21 17 14 10 23 9 15 2 16 22 13 11 31 30 01 MO/ST Selector Press 6 ST button on the remote control to select MONO mode or STEREO mode. Stereo reception is charged when STEREO appears. It is switched to mono mode when MONO appears. Subtitles OFF FM Section Tuning Range (Optional) 87. 5-108(MHz) (Europe) 87. 5-107. 9(MHz) (U. S. A. ) IF Range Usable Sensitivity (-30dB) 10. 7MHz 10dBuV Note: Due to continuous product improvement, specifications and design are subject to change without prior notice. * The function is only valid on remote control. Note: Increase the size of the picture During MP4(AVI, MPEG4) mode, Press 9 ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum size is reached. 2X 3X 4X * This function is operated by using the remote control. * This function only operates with disc featuring multi-subtitle recordings. * The number in the 2 mark on a disc package indicates the number of recorded subtitle languages. Signal-to-noise Ratio 50dB Stereo Separation Frequency Response 30dB 1KHz 20Hz-10KHz No Change 38 11 02 Installation MP4(AVI, MPEG4) Basic Operation of Mp4 (Brown line with brown head) 08 Press and hold 8 OSD LCD displays the current time. Note: Wiring Connection (Grey line with Video Out 2 yellow head) (Grey line with Video Out 1 yellow head) (Light Grey line with Rear Wire Out red & white head) Subwoofer Reverse Video(Brown line with yellow head) Input Bluetooth Phone (Black line with black head) Insert a MP4(AVI, MPEG4) disc into the slot, the unit will automatically switch on, if a disc is loaded, press 1 SOURCE to start the playback. Note: * You can press EJ button on the head unit * This function is operated by using the remote control only. Front Wire Out (Dark Grey line with red & white head) Repeat Playing During MP4(AVI, MPEG4) playback , press 15 RPT to perform replaying function, first press it to replay the current track, press it again to cancel this function. Note: to eject the MP4 disc. Number Buttons Antenna 4 3 5 1 6 you can select any tracks directly by using 23 Number Buttons( 0~9). The track you selected will be played automatically. Note: * This function is operated by using the remote control only. 2 * This function is operated by using the remote control only. Setting the Playback Time During MP4(AVI, MPEG4) playback, first press 2 GOTO, and monitor shows select : --- , press your desired time of the playback by using number buttons. Secondly press GOTO button, and the monitor shows: -:--:--, input your desired time, then press ENTER. Note: Stop the playback Orange Brown Red Yellow Black FILTER &FUSE BOX Reverse Gear Ignition Key Constant 12 Volts Ground Rear L Speaker Front L Speaker Parking Brake Lamp In Antenna Power + Rear R Speaker Front R Speaker Pink Blue Violet/Black Violet Grey/Black Grey 4 5 6 During MP4(AVI, MPEG4) playback, first press 18 to pause playing, then press 17 to play from the beginning of the disc, During stop status, press pause to resume playing state. Note: Green/Black Green White/Black White 1 2 3 * Press in the monitor performs the same function. * This function is operated by using the remote control only. Pause the Playback During MP4(AVI, MPEG4) playback, press 17 button to suspend the playback, Press it again to return to normal playback. Note: Slow motion playback During MP4(AVI, MPEG4) mode, press SLOW to slow forward or slow backward. There are speeds as follow: 1/ 2 1/ 4 1/8 1/16 Antenna Receptacle Output Plug(Male) Output Socket(Female) Screw Hole Wire Clip Fan Window * Press 3 on the head unit or in the monitor performs the same function. On Screen Display Press 8 Note: Note: * OSD button the display shows: Single remain time OFF This wire must be connected to the (-) negative side of the parking brake system of your vehicle. Once you engage the parking brake system, you will be allowed to watch the video. Do not connect the pink wire to the battery, otherwise it will use up the power of battery. 12 * This function is operated by using the remote control only. Single elapsed time 37 07 VCD/CD Program Playing During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press 27 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing. Move the cursor to and press ENTER to the previous page; move the cursor to and press ENTER to the next page. During this process, press 18 to cancel the program playing. Note: Installation Install the Unit Main Parts List 02 Selecting Channel During VCD status, repeatedly press 6 AUDIO button to select the following channel: Stereo Mono Right Selecting the corresponding channel to set the different sound characters. Note: Mono Left M4x3 &M5x5 £p £p Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 6 * This function is operated by using the remote control only. 4 Screws Each PBC Selector During VCD status, first press 3 TITLE button, the PBC playback starts and the menu of entire disc appears on LCD. [. . . ] * Press 22 CLEAR to clear the mistake input. --General Setup Page-TV Display Angle Mark OSD Lang Captions Screen Saver Go To General Setup Page Wide On Eng Off On --General Setup Page-TV Display Angle Mark OSD Lang Captions Screen Saver Set OSD Language Wide On Eng Off On English French German Spanish Italian Dutch Portuguese Selecting Tracks Fast During DVD playback, first press 21 to return to the beginning of the current track, press 21 again within 3 seconds to play previous track , press 21 to play next track . Note: Repeat Playing During DVD playback , press 15 RPT on the remote control to perform replaying function as followings: Chapter Off Note: Title 26 * Pressing and button on the head unit or and in the monitor also performs the same function. * This function is only valid on remote control. * The default setting is Disc Repeat. 23 05 DVD System Switch During playback mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. AUTO PAL Note: * The function can be operated by selecting DVD Press and hold 8 OSD to display the current time. Note: 05 Selecting MENU 1 Selecting Menu: During DVD status, press 4 MENU to return to the root menu, all of the chapters will appear on monitor. You can press 27 or 23 button to select your desired chapter. 2 Selecting Title: During DVD status, press 3 TITLE to return the title menu, all of the titles will appear on monitor. [. . . ]