User manual BOSS BLX15DVC

[. . . ] Press RESET button. 7 VCD/CD Playing a VCD/CD Disc 34 Selecting Tracks Fast 34 Repeat Playing 34 Playing Tracks at Random 34 Number Buttons 34 Stop Playing 34 Pause the Playback 34 Skip Backward/Forward/F. F/F. REW the Playback 34 System Switch 35 Slow Motion Playback 35 Increase Picture Size 35 On Screen Display 35 Setting the Playback Time 35 Selecting Channel 36 Selecting Title 36 Program Playing 36 9 Tuner Listening to the Radio 39 Band Selector 39 Manual/Automatic Tuning 39 DX/LOC Selector 39 Selecting the Stored Station 39 MO/ST Selector 40 Scanning/Memorizing Stations Automatically 40 Number Buttons 40 On Screen Display 40 Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly. Make sure the antenna is fully extended; if broken, replace the antenna with a new one. The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location. The Video line from main unit to the TV is not connected properly. [. . . ] There are speeds as follow: 1/ 2 1/ 4 1/8 1/16 * Press on the head unit or in the monitor performs the same function. On Screen Display Press 8 OSD button the display shows: Note: * This function is operated by using the remote control. 37 8 07 VCD/CD Program Playing During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press 27 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing. Move the cursor to and press ENTER to the previous page; move the cursor to and press ENTER to the next page. During this process, press 18 to cancel the program playing. Before You Start Remote Control 01 Selecting Channel During VCD status, repeatedly press 6 AUDIO button to select the following channel: Stereo Mono Right Selecting the corresponding channel to set the different sound characters. Note: The function is only valid on remote * control. Mono Left PBC Selector During VCD status, firstly press 3 TITLE button, the PBC playback starts and the menu of entire disc appears on LCD. And then you can select your desired track by using 27 or . 23 When a track is playing, you can press MENU to return to the menu, if you would like to end the track and select others. To cancel PBC playing, press 3 TITLE button again. Note: * PBC playing confirms to version 2. 0 or Note: The function is only valid on remote * control. above disc only. Tips: For more information as to replacing battery, please refer to Replacing the Battery on page 6. 36 9 01 Before You Start SOURCE/PWR (mode switch/turn on of off) GOTO (playing time/track) BAND/TITLE (band selection/title menu) (Pause/Play) AMS/MENU (preset stations, memory automatically/menu) LOC/SUB -T (long distant or local station selection/region function/subtitle display) ST/AUDIO (mono or stereo/language or channel selector) ANGLE (play angle) CLEAR OSD (current display) Briefly press it to display the current information; press and hold it to adjust the current setup ZOOM (to increase the picture) EQ (equalizer) SLOW (Slow play) P/N( system adjusting) Mute PROG(Program playing) ENTER (Left/Right/Up/Down ENTER) 0~9 (Number) Buttons Eject Button (Stop Playing) SETUP (F. R/F. F) (Previous/Next Track) VOL+/VOL-/SEL RPT(Repeat Playing) RDM (Playing Tracks at Random) VCD/CD System Switch During VCD mode, Press P/N on remote control to switch to PAL or NTSC or AUTO system. 07 On Screen Display During VCD/CD status, brief press 8 OSD button the display shows: Single elapsed time OFF Single remain time Total elapsed time Total remain time Note: * The function is only valid on remote control. Press and hold 8 OSD to display the current time. Note: * The function is only valid on remote control. Slow motion playback During VCD mode, press SLOW to slow forward or slow backward. There are speeds as follow:. 1/ 2 LOUD (loudness) 1/ 4 1/8 1/16 Setting the Playback Time During CD playback, first press 2 GOTO, and TFT shows : disc go to:--:--, press your desired time of the playback by using number buttons. During other modes, the main unit will keep the previous mode when exit the SD card. . Antenna Receptacle Output Plug(Male) Output Socket(Female) Screw Hole Wire Clip Fan Window Note: * The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car, but the menu and RCA output are free of it. If you do not want to use this function, connect it with the negative pole. Do not connect the pink wire to the battery, otherwise it will use up the power of battery. 12 33 06 MP3/USB/SD Number Buttons Press one of 23 Number Buttons(0~9) to select a track to play automatically. Note: * This function is operated by using the remote control. * Press 22 CLEAR to clear the mistake input. Installation Install the Unit Main Parts List 02 Playing a MP3/USB/SD Disc Insert a MP3 disc into the slot, the programs in the disc will be played, if a MP3 disc is loaded, press SOURCE to start the playback. Insert an USB into the slot, the programs in the USB will be played, if there has an USB, press SOURCE to start the playback. Insert a SD card into the slot, the programs in the card will be played, if there has SD card, press SOURCE to start the playback. When playing a disc included PIC file, first press 18 , then press [ ][ ] to select the option. Note: * You can eject a disc by pressing EJECT button on the base or on the remote control or in the monitor. * After inserts USB or SD must wait for 20 seconds to be able to eject the disc. Stop Playing ¼òµ¥ÕϳýÄÏ ¹ÊÅÅÖ¸ Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 6 7 M4x3 &M5x5 £p £p 4 Screws Each During MP3/USB/SD playback, Press 18 to stop the playback. Note: * Press in the monitor performs the same function. Selecting Tracks During MP3/USB/SD mode, firstly press 2 GOTO and the TFT shows:---. [. . . ] * Some functions varies depending on the types of models or formats of the disc. EXIT EXIT Changing the subtitle language (Multi-subtitle) With DVD s featuring multi-subtitle recordings. You can press 5 SUB-T to switch between subtitle languages during playback. Selection options switch as follows: In this menu you can adjust KEY BEEP, press it in the monitor and select ON or OFF, the default setting is ON, it means when you press the keys, they sounded. Setting REVERSE POLA in this menu. The signal is +12V when you are backing up a car, please press BATTERY in the monitor; if the signal is 0V, please press GROUND. Monitor Flex Subwoofer Subtitles 1 Subtitles 2 Subtitles OFF Note: CLOCK SYS KEY BEEP MONI FLEX EXIT EXIT In this menu you can adjust MONITOR FLEX, press it in the monitor and select MANUAL or AUTO, the default setting is AUTO, it means the monitor will flex automatically. 20 In this menu you can adjust SUBWOOFER, press it in the monitor and select ON or OFF, the default setting is ON. * This function is operated by using the remote control. * This function only operates with DVD's featuring multi-subtitle recordings. [. . . ]