User manual BOSS BV11.2BA

[. . . ] Use Authorized Service Center Do not attempt to disassemble or adjust this precision product. Please contact Boss Audio for all service. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Washing the Car Do not expose the product to water or excessive moisture. [. . . ] Then pressing the VOL+/- buttons on the front panel or VOLUME +/- button on the remote control to change hours. And then press SEL button to confirm it. Press SEL button again, the minute will be flashing. Then you can change the minutes according to the operation described above. MUTE Press MUTE button on the front panel or MUTE button on the remote control to mute down the sound instantly. Volume Level Adjustment Pressing VOL+/- buttons on the front panel or VOLUME +/- on the remote control to increase or decrease the volume level. EQUALIZATION Press EQ button shortly to turn on equalization function and to select desired audio mode. There are four kinds of mode as below: FLAT CLAS POP ROCK EJECTING A DISC Press (EJECT) button on the DVD unit or on the remote control to eject the disc. FACEPLATE RELEASE ) button on the front panel Press REL ( to detach the removable faceplate. SOUND ADJUSTMENT Press SEL button on the front panel of the unit or on the remote control to select the desired adjustment mode. The adjustment mode will change in the following order: VOL (Volume) BAS (Bass) TRE (Treble) BAL (Balance) FAD (Fader) By pressing the VOL+/- buttons on the 15 SUBWOOFER Press EQ (SW) button on the front panel for several seconds to toggle subwoofer output. Each time the button is pressed, the speed of slow forward/reverse changes according to the disc as follows. DVD: Normal Playback SF1/7 SF1/2 SF1/6 SF1/3 SF1/5 SF1/4 BASIC PLAY OPERATION Stopping Playback - Briefly press (Stop) button to pre-stop the unit playback, when button on the front panel or (Play) button on the remote control is pressed, normal playback will continue. 16 In slow motion state, press on the remote control or on the DVD unit to recover normal playback. Skipping Track Press / buttons on the remote control or T-UP/T-DN buttons on the front panel during playback. to or T-UP to skip to the next Press or T-DN to skip to the track, and press previous track. Note: For some VCD2. 0 discs (PBC/ buttons or Tplayback control), UP/T-DN buttons may be unavailable. DVD VIDEO MENU PLAY When playing a DVD disc in the DVD player: 1) The disc will be played automatically and stop at menu picture. 2) Use / , / cursor buttons to move between the highlight bars in the menu. 3) Press OK button to confirm the selected item. MENU FUNCTION Press the MENU button on the remote control during DVD mode will return to the menu stored in the current disc. ADVANCED OPERATION REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: When you want to repeat playing the whole disc or a track or a chapter in the disc. 1) Press REPEAT button on the remote control or RPT button on the DVD unit repeatedly to select different repeat modes. 2) For different kinds of disc, pressing REPEAT/RPT button has different effects. [. . . ] 2) KEY: Change among #, -4, -2, 0, +2, +4, b. 20 TROUBLE SHOOTING If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. [. . . ]