User manual BOSS BV2450

[. . . ] Do not open covers and do not repair yourself. WARNING: - To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. - To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories. - This device is intended for continuous operation. [. . . ] Fast-Reverse Press 7 button (29) during playback. Each time the button is pressed, the speed of fast-reverse increases as follows: BACKWARD 2X Æ 4X Æ 8X Æ 20X In fast-reverse mode, press to return to normal playback. button (2) Finding the Beginning of Chapters or Tracks (Files) Use this function to easily move to the beginning of the chapters or tracks (files) on the disc. During playback, press the : button (5) or 9 button (4) to skip and playback the chapter/track. : :Press the button to start playback from the beginning of the next chapter or track (file). 9 :Press the button to start playback from the beginning of the previous chapter or track (file). For some VCD2. 0 discs (PBC control), : / 9 or 8 / 7 buttons may be unavailable. Repeat Play/ Paragraph Repeat Play - Repeat play: Use this function when you wish to repeat an entire disc, a track or a chapter in the disc. 1) Press RPT button (15) repeatedly to select different repeat modes. BV2450 User's Manual - page 11 2. Waite a moment for the player locate the track. Playback starts from the selected chapter or track. Multi-Angle Function For DVD discs in which scenes have been filmed from multiple angles, the viewing angle can be switched during playback. The following information will be shown on the screen. ANGLE 1 Each time you press the button, the subtitle cycles between the different languages recorded on the disc. Notes: - Not all discs will allow changing the subtitle during playback. In these cases, select the subtitle from the DVD menu. - There may be a delay before the selected subtitle appears. - For some discs, the subtitles will be displayed even when this is set to off. - The number of available languages varies from disc to disc. Switching the Audio Tracks For VCD/SVCD discs which have multiple audio tracks, you can change the audio track temporarily during playback Press the AUDIO button (22) to switch between the audio tracks recorded on the disc. Notes: - Some discs only contain one soundtrack language. Multi-audio Language Function For DVD discs which have multiple language soundtracks, you can change the language track temporarily during playback. Press the AUDIO button (22) to switch between the audio tracks recorded on the disc. The angle setting cycles between the available viewing angles recorded on the disc each time the button is pressed. [. . . ] 2) KEY: Change among b, -4, -2, 0, +2, +4, #. 4. Audio output level: 10K (2CH 2. 0 + 0. 5V rms) 5. Audio signal output characteristics: (1) Frequency response: 20Hz - 20 KHz (2) S/N ratio: 80 dB(JIS) (3) Wow and flutter: Below measurable limits Digital Setup When you open the DIGITAL SETUP menu, you will see the DIGITAL SETUP screen: Note: Specifications and design are subject to modification, without notice, due to improvements in technology. 1) OP MODE: Change among LINE OUT/RF REMOD. - LINE OUT: LINE OUT mode, with digital dialog normalization. [. . . ]