User manual BOSS BV8.5BA

[. . . ] Do not open covers and do not repair yourself. Warning: - To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. - To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories. - This device is intended for continuous operation. [. . . ] Waite a moment for the player locate the track. Playback starts from the selected chapter or track. * This function is only available for discs on which chapter numbers are recorded. Playing in random order Press RDM button (33) to switch the random mode on/off. If the random mode is on, tracks (files) on the disc will be played in a random order. On Screen Display function Press the DISP button (13) on the remote control during playback to display on screen information about the current disc. For DVD: Pressing and holding DISP button (13) on the remote control to display information in the following manner. Displays the remaining playback time for the current chapter. 5)T: Displays the total playback time for the current title. 6)T-: Displays the remaining playback time for the current title. 7)C: Displays the total playback time for the current chapter. 8) Displays the current disc language, audio type, subtitle language and play angle. Switching the audio tracks For VCD/SVCD discs which have multiple audio tracks, you can change the audio track temporarily during playback Press the AUDIO button (22) to switch between the audio tracks recorded on the disc. Notes: - Some discs only contain one soundtrack language. Multi-audio language function For DVD discs which have multiple language soundtracks, you can change the language track temporarily during playback. Press the AUDIO button (22) to switch between the audio tracks recorded on the disc. The angle setting cycles between the available viewing angles recorded on the disc each time the button is pressed. Notes: - The ANGLE function is only available for discs which support it and programs in have been recorded. - Depending on the disc, the angle may switch in one of two ways. Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches. - The angle number varies from disc to disc. Program play function - In VCD/CD playback mode, press PROG button (32) to activate the program edit interface as follow: : : Notes: - The language number is different according to the disc. BV8. 5BA User's Manual - page 14 Use // / cursor button to select the item that you want to program. 1) The item you selected will become highlighted. 2) Input the track number that you want to program by numeric buttons (0~9) on the remote control. 3) Press // / cursor buttons to move to "PLAY" operation button and then press ENTER button (18) to program the playback. [. . . ] Check if the audio format of the selected audio language matches your receiver's capabilities. Buttons Do Not Work Press Reset button on the front panel of the DVD unit. BV8. 5BA User's Manual - page 21 Additional Information About Parental Control DVD discs have a parental level assigned to each disc. The range of parental controls is from 1 to 8. In general, this range corresponds to established movie rating systems. [. . . ]