User manual BOSS BV8255T

[. . . ] BV82 5 5T Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . 3 Disc Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ) Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. POP FLAT ROCK JAZZ CLASSIC DVD 11-0:44:36 LUD SWF LUD RDM SWF DSP INT POP CLK RPT DISC TA OSD 11:08 AF RESET The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. All the function buttons do not operate. Error symbol on the display. touch to select It`s depend on your habit to select the Audio mode . Scroll Caption Adjustment In Radio mode: You can adjust your desired scroll caption , the method of the operation as follow: A). Press and hold the SETUP button (for about 2 seconds) on the remote control, the adjustment scroll bar will display on the screen . Use the VOL+/- to select among of the "A, B, C . . . . X, Y, Z, and blank ", and use the / button on the front panel 18 Radio Operation Listening to the Radio Switching To Radio Mode BND MOD Selecting The Frequency Band Touch the BND section on the touch screen repeatedly to select the band , screen band will show in turn : Touch the MOD range repeatedly on the screen to select the RADIO mode. the following information will appears as below: FM1 106. 00 MHz ST DX FM1 FM2 FM3 AM1(MW1) LUD SWF POP AM2(MW2) 1 87. 50 4 106. 00 2 90. 00 5 108. 00 3 98. 00 6 87. 50 ( You can also press the BND on front panel repeatedly to select the band . ) You can use your finger to select the desired the band to heard . Start Searching For a Station Manual Search During Radio mode, briefly touch the screen of " " section or press the " " on front panel to increase frequency by one step of channel spacing . Briefly touch the " " section or press the " " button on the front panel to decrease frequency by one step of channel spacing . Use your finger to touch the screen, the following information will appears on the screen : FM1 ST 106. 30 MHz DX TA CH 6 LUD 1 4 SWF 2 5 POP 3 6 DISC 11:08 MOD BND FM1 ST 106. 30 MHz DX TA CH Automatic Search 6 LUD VOLUME- SWF SEL POP DISC 11:08 VOLUME+ ST/MON LOC APS During Radio mode, touch and hold (for more than 2's ) the screen of " / " section or press longer the " / " on the front panel to start search for a radio station automatically . FM1 ST 106. 30 MHz DX TA CH 6 When an FM stereo broadcast is hard to receive ST/MON LUD SWF SWF POP LUD DISC DSP 11:08 CLK TA AF PTY Touch the ST/MON section on touch screen (or press ST/MO button on the remote) to select the MONO or STEREO mode . Touch " Touch " " to next . 19 ( When Stereo mode is activated, the ST symbol will appear . ) Radio Operation To tune in strong-singnal FM Station only (LO/DX function) Touch the LOC section on the touch screen (or press LO/DX button on the remote) to select the LOCAL or DX mode . (You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . ) LOC Automatic Memory Storing & Program Scanning Automatic Preset Setup In Radio Mode, Touch and keep the " APS " section on the touch screen for more than two seconds to active automatic station storage. The radio searches within the current frequency band, e. g. FM1, for stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . APS Storing Stations In Memory Setting Memory Press the " /CH 1-6 " button repeatedly on the front panel to preset stations at radio mode . ( Or touch the screen the 1-6 sections ) FM1 ST Scan Function In Radio mode, briefly touch the " APS "section on touch screen the radio briefly plays all the preset stations of the frequency band . APS 106. 30 MHz DX TA CH 6 LUD 1 4 SWF 2 5 POP 3 6 DISC 11:08 MOD BND RDS FUNCTION In Radio mode, touch it to select the desired item, it will display the following as below : Touch to preset station With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below : -Store in Memory Touch and keep the 1-6 sections (or press and hold the /CH1-6 ) for about 2 seconds, the current listening station will be stored into the number location . -Retrieve a preset station Touch the 1-6 sections briefly (or press the " /CH1-6 " button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display . 20 FM1 106. 30 MHz ST DX TA CH 6 LUD SWF SWF POP LUD DISC DSP 11:08 CLK TA AF PTY TA Traffic Annonuncement (priority For Traffic Information) TA In Radio mode, touch the TA section briefly to activate the TA function. [. . . ] Press the or button to skip a track ahead or back. Touch longer (more than 2's ) the " / " range for fast forward or fast backward . Press longer the or button for forward or backward . 35 Specification Supply Voltage: Current Consumption: Signal System: Power Output: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1. 0Vp-p 75 80W x 4 (1)DVD-VIDEO Disc 5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc 5-Channel Line Out (2 Volts) (1)Frequency Response 20 Hz - 20 KHz (2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Below measurable limits Audio Signal Output: Characteristics: RADIO Section: Frequency Coverage: IF: Sensitivity (S/N = 30 dB): Frequency Coverage: IF: Sensitivity (S/N = 20 dB): For 3 Bands (Europe) FM 87. 5 to108 MHz 10. 7 MHz 15 dBu MW 522 to1620 KHz 450 KHz 40 dBu For 2 Bands (Europe) FM 87. 5 to108 MHz 10. 7 MHz 15 dBu MW 522 to1620 KHz 450 KHz 40 dBu For 2 Bands (U. S. A. ) FM 87. 5 to107. 9 MHz 10. 7 MHz 15dBu AM 530 to1710 KHz 450 KHz 40 dBu TFT Monitor: Monitor Screen Size: Number of Pixels: Color System: 5. 3 Inch Wide 960 X 234 pixels NTSC/PAL TV Section : TV System: TV Sensitivity: NTSC/PAL/SECAM NOTE: Specifications and design are subject to modification, without notice, due to improvements in technology. 36 Trouble Shooting Before going through the check list, check wiring connection. [. . . ]