User manual BOSS BV9600

[. . . ] Press RESET button. Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly. Make sure the antenna is fully extended; if broken, replace the antenna with a new one. The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location. The Video line from main unit to the TV is not connected properly. [. . . ] If the same problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer. ! FM3 MW1 1 FM3 MONO P. CH:1 6 Insert the Battery Holder into the Remote Control. P1:87. 50MHz P2:90. 00MHz P3:87. 50MHz P4:87. 50MHz P5:87. 50MHz P6:87. 50MHz EQ. OF F LOUD. OFF * Press BAND on the head unit performs the same function. Manual/Automatic Tuning Manual Tuning: Press ( or ) button on the remote control continuously to select a station downward or upward respectively. Automatic Tuning: Press and hold ( or ) button for more than 3 seconds, the radio automatically searches a station downward or upward respectively and plays when it finds a station. Note: * Press and button on the head unit performs the same function. 4 5 1 Band Indicator Shows which band the radio is tuned to. 2 Preset Number Indicator Warning Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit. Precautions on Using Lithium Battery Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately. Cleaning the battery with a dry cloth, to ensure its perfect connected. Make sure the proper polarity when loading with the battery. To prevent short circuit, do not use metal tweezer to clip the battery. Shows what preset has been selected. 3 Frequency Indicator Shows which frequency the tuner is tuned. 4 EQ Indicator Replacing the Battery When the range of the operation of the card remote control becomes short or no functions while operating. Replace the lithium battery with a new button cell (CR2025). Make sure the battery polarity before replace. Gently pull out the Battery Holder while pressing the Stopper. Shows the EQ Setting of the radio. 5 MBP Indicator DX/LOC Selector During radio status, press 5 LOC button to select strong or weak station reception. LOC appears on the display and only local station is available. when it disappears both distance and local stations can be received. Note: * The function is only valid on remote control. * The default setting is catalog Repeat. * This function is operated by using the remote control. 1 2 3 Antenna Receptacle Output Plug(Male) Output Socket(Female) 4 5 6 Screw Hold Wire Clip Fan Window Note: * The brown wire is connected with brake signal; to make sure the safety, the programs can be seen on the monitor after braking the car, but the menu and RCA output are free of it. If you do not want to use this function, connect it with the negative pole. 11 30 02 Installation DVD ---Preferences page-- 05 Install the Unit Parts List Default (Press Example showing how to set load factory setting: (Press , or , then press ENTER) --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Load Factory Setting Auto Eng Eng Eng M4x3 &M5x5 £p £p Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 6 4 Screws Each Reset 7 Outer Trim Frame x 1 Connecting Wire x1 Steel Bar x 1 Installation Method Panel DIN Front-Mount Install twor M5x6 screws on both sides (left and right) of the lock hook brackets Bend these claws outward for a tight fit, if necessary. Install the unit with four M2 2 screws Fire Wall To support the unit Install Outer Trim Frame 12 29 05 DVD ---Preferences page-- Installation Install the Unit Installation Method , then press ENTER) Installation using the screw holes at the sides of the unit. Select a position where the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit become aligned (are fitted), and tighten the screws (see 4 at 2 places on each side). And then fasten them to the car. Note: Outer Trim Frame 5 and Mounting Sleeve 1 are not used for installation method. 02 Disc Menu (Press Example showing how to set Disc Menu Language: (Press , or --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Auto Eng Eng Eng Bracket supplied to your car English Preferred Menu Language Parental (Press Example showing how to set parental control: (Press , or , then press ENTER) Dashboard or Console --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Set Parental Control Auto Eng Eng Eng 2G 3 PG 4 PG 13 5 PGR 6R 7 NC 17 8 Adult Off Detach the Unit 1. Screw the 4 screws, pull the head unit out. Password (Press Example showing how to set password, and the default pas sword is 8888. (Press , or , then press ENTER) --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Change Password Auto Eng Eng Eng Change 28 13 03 General Operations Setting the Sound Characteristics Repeatedly press 14 SEL button to select the desired mode in the following order: DVD ---Preference page--- 05 Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel at first, and then Press 9 RESET button on the base with a pointed object, (such as a ballpoint pen) to set the unit to initial status. Note: * When some errors occur on the display, you can also press RESET button to resume to normal, and it will erase the clock setting and some memorized functions. * This function can only be operated by the head unit. TV Type VOL TRE BAL FAD BAS Example showing how to set TV type: (Press , or , then press ENTER) (Press --Preference Page-- --Preference Page-TV Type Audio Subtitle Disc Menu Parental Password Default Set TV Standard Auto Eng Eng Eng PAL Auto NTSC After selecting the desired mode, you can adjust the current level by pressing 14 VOL buttons. Note: * Pressing 7 button and rotating it on the head unit also performs the same operation. TV Type Audio Subtitle Disc Menu Parental Password Default Go To Preference Page Auto Eng Eng Eng EQ Setting While listening to the popular music, classic music or rock music, you can select the corresponding preset modes to adjust the sound quality perfectly by using 26 EQ button. Repeatedly keep pressing 26 EQ button to 3 choose the following modes in turn: POP EQ OFF CLASSICAL ROCK Turning the Unit On/Off Press 1 PWR button to turn on the unit, press it again, the unit is still in the waiting status. When insert a disc, the unit will automatically start playing. [. . . ] If the disc that is inserted does not have the preferred option then the discs own preference will be used. * Regarding SETUP MENU, please refer to the following pages for more details. * Some functions varies depending on the types of models or formats of the disc. * This function is operated by using the remote control. Turning on or off the radio can be set in this menu, the default setting is ON. * This function only operates with DVDs featuring multi-subtitle recordings. * The number in the 2 mark on a DVD's package indicates the number of recorded subtitle languages. 18 23 05 DVD System Switch During playback mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. AUTO PAL Note: * The function can be operated by selecting the DVD MENU SETUP. Main Menu Press and hold 8 OSD to display the current setup. Note: * Press the DISP button on the head unit perform the same function. 04 Clock System DISC CHANGER Setup NTSC DVD Playback Setting During DVD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/sound/captions/angle /title time/chapter time/repeat playing /time option. [. . . ]