User manual BOSS BV9650

[. . . ] 00 Contents Additional Information Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . 09 Problem No power. 1 Before You Start Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 8 Specifications 10 4 5 Main Menu Main Menu Setup Audio Adjust 16 Video Adjust 17 Source Setup 18 Others 19 16 Some errors occur in the LCD or no function when pressing the button. Unable to receive stations. 5 DVD Playing a DVD 21 Selecting Tracks Fast 21 Repeat Playing 21 Number Buttons 21 Stop the Playback 21 Pause the Playback 21 Selecting Tracks/F . F/F. REW 21 System Switch 22 Slow Motion Playback 22 Increase Picture Size 22 On Screen Display 22 Setting the Playback Time 22 Changing the Viewing Angle 22 Changing Audio Language 23 Changing the Subtitle Language 23 Selecting Menu 23 DVD Setup Menu 23 2 Installation Wiring Connections 11 Install the Unit 12 Poor effect on receiving a station. 3 General Operations Reset the Unit 14 Turning the Unit On/Off 14 Volume Control 14 Setting the Sound Characteristics EQ Setting 14 Turning Loudness On 15 Eject a Disc 15 Open the Monitor 15 Angle Setting 15 Mute Function 15 Clear 15 Mode Selector 15 Menu Setup Button 15 Sensor 15 Force Disc Out 15 14 CDs cannot be loaded. . Cause/Solution Check and make sure whether the fuse is blown, replace with the proper value if necessary. [. . . ] To cancel PBC playing, press 3 TITLE button again. Note: * PBC playing confirms to version 2. 0 or above disc only. 17 The Whole 15 18 14 7 1 16 3 10 12 2 8 9 4 SOURCE Brief press to select radio mode or playback mode, hold and press it to turn the unit on or off. BAND (band selector) Button / / / /E ( [Left/F. F]/[Right/F. R]/ [Up/Next track]/[Down/Previous track] [Enter] ) Button (ANGEL+) Button (ANGEL-) Button VOL+/ VOL-/SEL REMOTE Infrared Sensor RESET Button EQ Button (MENU) Button Brief press to set DVD menu during playback mode, brief press it to set the radio menu during radio mode. LOUDNESS (Loudness control) Button EXIT (Back Space) Button Disc Loading Slot OPEN Button MUTE Button LCD Screen DISP Button 34 7 01 Before You Start VCD/CD System Switch During VCD mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. AUTO PAL Note: 07 On Screen Display During VCD/CD status, brief press 8 OSD button the display shows: Title elapsed time Title remain time Chapter elapsed time Remote Control NTSC OFF chapter remain time Press and hold 8 OSD to display the current setup. Note: * Press the DISP button on the head unit performs the same function. 20 * The function is only valid on remote control. Slow motion playback During VCD mode, press to slow forward or slow backward. There are speeds as follow:. 1/ 2 1/ 4 1/8 Setting the Playback Time During CD playback, firstly press 2 GOTO, and TFT shows : disc playback time:--:--, press your desired time of the playback by using number buttons. Secondly press GOTO button, the tracks time appears on TFT, also input your desired numbers to play the current time of your selection. During VCD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/sound/captions/angle /title time/chapter time/repeat playing /time option. Press [ ][ ] to select the options, press ENTER to set the status. Then press 23 NUMBER BUTTONS or [ ][ ] to set the current status. Note: Note: * The function is only valid on remote control. Increase the size of the picture Tips: For more information as to replacing battery, please refer to Replacing the Battery on page 6. During VCD mode, Press 9 ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum size is reached. 2X 3X 4X No Change Note: * The function is only valid on remote control. * To remove the image by pressing 27 button. * This function is operated by using the remote control. 8 33 07 VCD/CD Number Buttons Press one of 23 Number Buttons(0~9) to select a track to play automatically. Note: Note: * You can eject a disc by pressing base or on the remote control. Before You Start SOURCE/POWER GOTO (playing time/track) BAND/TITLE (Pause/Play) AMS/MENU LOC/SUB -T ST/AUDIO (mono or stereo/language or channel selector) ANGLE CLEAR OSD Brief pressing it to display the current information; keep pressing it to display the current setup information. ZOOM (to increase the picture) EQ Slow Forward/Reward) P/N( system adjusting) Mute 0~9 (Number) Buttons (Eject Button) LOUD (Loudness) (Stop Playing) SETUP (F. F/F. R) (Previous/Next Track) VOL+/VOL-/SEL RPT(Repeat Playing) RDM (Playing Tracks at Random) 01 Playing a VCD/CD Insert a VCD/CD disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. on the Selecting Tracks Fast During VCD/CD playback, firstly press 21 to replay the current track, press 21 again to play the backward track, Press 21 to play next track. Note: ¼ò¹¥Õϳý µ Stop Playing Ê Å Å Ö ¸ Ä Ï During VCD/CD playback, firstly Press 18 button then press or to replay, press again to stop the playback. 18 Note: * This function is operated by using the remote control. * Press 22 CLEAR to clear the mistake input. * Pressing and button on the head unit also performs the same operation. * This function is operated by using the remote control. Repeat Playing During VCD/CD playback , repeatedly press 15 RPT to perform replaying function, first press it to replay the current track, press it again to cancel this function. Note: Pause the Playback During VCD/CD playback, press switch between play and stop. Note: to ENTER (Left/Right/Up/Down ENTER) * This function is operated by using the remote control. * The default setting is Disc Repeat. * This function is operated by using the remote control. PROG(Program playing) Playing Tracks at Random During VCD/CD playback, pressing 16 RDM button on the remote control to play any track at random under the directory which you select. Press it again to return to normal playing. Note: Skip backward/forward/F. F /F. REW the playback Press 20 ( or ) on remote control to perform fast reward or fast forward. 2X 4X 8X 16X Note: * This function is operated by using the remote control. 32 * Press or on the head unit performs the same function. 9 01 Before You Start MP3 Pause the Playback During Mp3 playback, press itch between play and stop. to sw- 06 Specifications General Power Requirement Load Impedance Max. Power Output Tone Controls 80W x 4 10dB Bass 100Hz Treble 10KHz Approx. 160x178 x 50 mm (d/w/h) Approx. 170 x 117. 5x16. 5 mm (d/w/h) 30~100 Approx. 2. 55kg IF Range 14. 4V DC (11-16V allowable) AM Tuner Section Frequency Range (Optional) 522-1620(KHz) (Europe) 530-1710 (KHz) (U. S. A. ) 450KHz Note: * This function is operated by using the remote control. Skip backward/forward/F. F /F. REW the playback Press 20 ( or ) on remote control to perform fast reward or fast forward. 2X 4X 8X 16X Usable Sensitivity 32dBuV (-20dB) Dimensions TFT Sizes DVD/VCD/CD Player Section VCD Signal System Frequency Response Signal-to-noise Ratio Separation Distortion AUTO/PAL/NTSC 20Hz to 20KHz 60dB 55dB(1KHz) 1% Note: * Press or on the head unit performs the same function. Angle between folded and unfolded Weight On Screen Display Hold and press OSD button to display the current status. FM Section Tuning Range (Optional) 87. 5-108(MHz) (Europe) 87. 5-107. 9(MHz) (U. S. A. ) IF Range Usable Sensitivity (-30dB) 10. 7MHz 10dBuV CD/VCD Section CHANGER (Optional) Note: DVD Signal System Number of channel Dynamic Range AUTO/PAL/NTSC 2 channels 60dB * Press DISP button on the head unit performs the same function. Signal-to-Noise Ratio 60dB Signal-to-noise Ratio 50dB Stereo Separation Frequency Response 30dB 1KHz Note: Due to continuous product improvement, specifications and design are subject to change without prior notice. 20Hz-10KHz 10 31 06 MP3 Number Buttons Press one of 23 Number Buttons(0~9) to select a track to play automatically. Note: Installation Wiring Connection Rear Video Out 2 Rear Rear (Grey line with yellow head) (Grey line with Video Out 1 yellow head) (Light Grey line with Wire Out red & white head) (Dark Grey line with red & white head) (Optional) 02 Playing a Mp3 Disc Insert a MP3 disc into the slot, the unit will automatically switch on, if a MP3 disc is loaded, press SOURCE to start the playback. During MP3 playback, the moving playing information displays on LCD. When playing a disc included PIC file, first press 18 , then press [ ][ ] to select the option. Note: * You can eject a disc by pressing 2 base. Subwoofer (Optional) * This function is operated by using the remote control. * Press 22 CLEAR to clear the mistake input. Front Wire Out (Brown line with brown head) (Black line with red Audio Aux In or white head) Reverse Video (Brown line with yellow head) Input (Black line with Video Aux In yellow head) on the ¼ò¹¥Õϳý µ Stop Playing Ê Å Å Ö ¸ Ä Ï During Mp3 playback, Press 18 the playback. Note: CD Changer Receptor (Black) to stop 6 3 4 5 1 Selecting Tracks Fast During Mp3 playback, press 21 play the backward track, Press 21 play next track. Note: to to * This function is operated by using the remote control. 2 Selecting the MP3 Track During Mp3 mode, firstly press 2 GOTO and the TFT shows:---. Then press 23 NUMBER BUTTONS to input the Mp3 track s Number to play it, ; secondly press GOTO button, and the TFT shows : --:-- , now input the desired Number to play the current track at this point, If there are some mistakes, press 22 CLEAR to clear them. Note: Reversing Signal Ignition Key Memory Back-up12V Negative Ground Rear L Speaker Front L Speaker * Pressing and button on the head unit also performs the same operation. Orange Brown Red Yellow Choke Black Box Braking Signal Illuminating control To power Antenna Rear R Speaker Front R Speaker Pink Blue Violet/Black Violet Grey/Black Grey Repeat Playing During Mp3 playback , press 15 RPT to replay the current track, press it again to cancel this function. Note: Green/Black Green White/Black White * This function is operated by using the remote control. * The default setting is catalog Repeat. * This function is operated by using the remote control. 1 2 3 Antenna Receptacle Output Plug(Male) Output Socket(Female) 4 5 6 Screw Hold Wire Clip Fan Window Note: * The brown wire is connected with brake signal; to make sure the safety, the programs can be seen on the monitor after braking the car, but the menu and RCA output are free of it. [. . . ] Press [ ][ ] to select the options, press ENTER to set the status. Then press NUMBER BUTTONS or [ ][ ] to set the current status. Note: Slow motion playback During DVD mode, press to slow forward or slow backward. There are speeds as follow: 1/2 1/8 Note: * The function is only valid on remote control. 1/4 1/4 1/8 1/2 * This function is operated by using the remote control. When there is changer in model, set this menu secondly, the disc in the changer will be played directly. [. . . ]