User manual BOSS BV9965T

[. . . ] 023619 00 Contents Additional Information Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . 11 Problem No power. 1 Before You Start Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 8 Specifications 10 5 DVD Playing a DVD 21 DVD Setup 21 Selecting Tracks Fast 21 Stop the Playback 21 Pause the Playback 21 Selecting Tracks/F . F/F. REW 21 Number Buttons 21 Repeat Playing 21 System Switch 22 Slow Motion Playback 22 Increase Picture Size 22 On Screen Display 22 Setting the Playback Time 22 Changing the Viewing Angle 22 Changing Audio Language 23 Changing the Subtitle Language 23 Selecting Menu 23 DVD Setup Menu 23 Some errors occur in the LCD or no function when pressing the button. Unable to receive stations. 2 Installation Wiring Connections 11 Install the Unit 12 Poor effect on receiving a station. 3 Common Operations Reset the Unit 14 Turning the Unit On/Off 14 Volume Control 14 Setting the Sound Characteristics EQ Setting 14 Turning Loudness On 15 Eject a Disc 15 Open the Monitor 15 Angle Setting 15 Mute Function 15 Clear 15 Mode Selector 15 Menu Setup Button 15 Sensor 15 Eject a Disc Compulsively 15 14 CDs cannot be loaded. Images skip. 6 MP3 Playing a MP3 Disc 29 Selecting Tracks/F . F/F. REW 29 Repeat Playing 29 Number Buttons 29 Stop Playing 29 Selecting Mp3 Tracks 29 Pause the Playback 29 Skip Backward/Forward/F. F/F. REW the Playback 29 On Screen Display 29 . [. . . ] when it disappears both distance and local stations can be received. Note: * The function is only valid on remote control. * The function is invalid in AM tuning. To increase or decrease the volume. 6 BAND To select the bands. 7 AMS Briefly press to scan the current station, hold and press to tune automatically. 8 MENU Press this button to set the main menu. 9 SRC Press this button to select the signal source. 10 The 6 stations of the current band. Selecting the Stored Station During radio status, press 27 button to select the stored station upward, press to select the stored station downward. Note: * Press or button on the head unit performs the same function. 35 Put the button-type battery with mark(+) upward into the Battery Holder. Briefly press to select station, hold and press to save the current station to one of the 6 stations. 11 RDS Press it to enter RDS SETUP. 6 08 MP4 Skip backward/forward/F. F /F. REW the playback Press 20 ( or ) on remote control to perform fast reward or fast forward. 2X 4X 8X 16X Before You Start Location of the Controls The Expanding 01 Setting the Playback Time During MP4(AVI, MPEG4) playback, firstly press 2 GOTO, and monitor shows : --:--, press your desired time of the playback by using number buttons. Secondly press GOTO button, and the monitor shows: --:--:--, input your desired time, then press ENTER. Note: Note: * This function is operated by using the remote control. * Press and on the head unit or and in the monitor perform the same function. Selecting Tracks Fast During MP4(AVI, MPEG4) playback, firstly press 21 to replay the current track, press 21 again to play the backward track, press to play next track. 21 Note: * Pressing and button on the head unit or also and in the monitor perform the same operation. Menu Selector During MP4(AVI, MPEG4) playback, firstly press 4 MENU to return to the title menu, you can select your desired chapter by press or 23 , then press 17 to play. 27 Note: The Whole * This function is operated by using the remote control. SRC Brief press to select radio mode or playback mode, hold and press it to turn the unit on or off. BAND (band selector/play/pause) Button ( [F. R/ Left ]/[F. F/Right ]) (ANGEL+) Button (ANGEL-) Button VOL+/ VOL-/SEL REMOTE Infrared Sensor RESET Button 34 (MENU) Button During DVD mode, brief press to set DVD menu, hold and press to set the main menu. During other modes, brief press it to set the main menu. TA/LOU (Traffic Alarm/Loudness control) (Back Space) Button Disc Loading Slot OPEN Button MUTE Button LCD Screen (PLAY/PAUSE) Button DISP Button 7 ([Previous/UP][DOWN/ Next Track) 01 Before You Start MP4 Basic Operation of Mp4 Insert a MP4(AVI, MPEG4) disc into the slot, the unit will automatically switch on, if a disc is loaded, press 1 SOURCE to start the playback. Note: button on the head unit to * You can press eject the MP4 disc. 08 Pause the Playback During MP4(AVI, MPEG4) playback, press 17 button to suspend the playback, Press it again to return to normal playback. Note: Remote Control * Press on the head unit or performs the same function. in the monitor Number Buttons you can select any tracks directly by using 23 Number Buttons( 0~9). The track you selected will be played automatically. Note: * This function is operated by using the remote control only. Repeat Playing During MP4(AVI, MPEG4) playback , press 15 RPT to perform replaying function, first press it to replay the current track, press it again to cancel this function. Note: Stop the playback During MP4(AVI, MPEG4) playback, firstly press 18 to pause playing, then press 17 to play from the beginning of the disc, During stop status, press pause to resume playing state. Note: * Press in the monitor perform the same function. * This function is operated by using the remote control. On Screen Display Brief press 8 OSD button the display shows: Title elapsed time OFF Title remain time Chapter elapsed time chapter remain time Tips: For more information as to replacing battery, please refer to Replacing the Battery on page 6. Press and hold 8 OSD LCD displays the current setup. Note: * This function is operated by using the remote control. 8 33 07 VCD/CD Program Playing During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press 27 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing. Move the cursor to and press ENTER to the last page; move the cursor to and press 27 ENTER to the next page. During this process, press 18 or press PROG to cancel the program playing. Note: * The function is only valid on remote control. Before You Start SOURCE/POWER GOTO (playing time/track) BAND/TITLE (Pause/Play) AMS/MENU LOC/SUB -T ST/AUDIO (mono or stereo/language or channel selector) PTY/ANGLE CLEAR OSD 0~9 (Number) Buttons (Eject Button) TA/LOUD (traffic alarm/ loudness) AF/EQ ZOOM (to increase the picture) SLOW (Slow Forward/Reward) P/N( system adjusting) Mute PROG(Program playing) ENTER (Left/Right/Up/Down ENTER) (Stop Playing) SETUP (F. F/F. R) (Previous/Next Track) VOL+/VOL-/SEL RPT(Repeat Playing) RDM (Playing Tracks at Random) 01 Selecting Channel During VCD status, repeatedly press 6 AUDIO button to select the following channel: Stereo Mono Right Selecting the corresponding channel to set the different sound characters. Note: * The function is only valid on remote control. Mono Left PBC Selector During VCD status, firstly press 3 TITLE button, the PBC playback starts and the menu of entire disc appears on LCD. And then you can select your desired track by using 27 or . 23 When a track is playing, you can press MENU to return to the menu, if you would like to end the track and select others. To cancel PBC playing, press 3 TITLE button again. Note: * PBC playing confirms to version 2. 0 or above disc only. Brief pressing it to change the currently displaying: vivid, standard, soft, user; in radio mode, to switch between RDS setup and preset frequencies. Hold and press it to display the current status. 32 9 01 Before You Start VCD/CD System Switch During VCD mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system. 07 On Screen Display During VCD/CD status, brief press 8 OSD button the display shows: Title elapsed time OFF Title remain time Chapter elapsed time Specifications General Power Requirement Load Impedance Max. Power Output Tone Controls 85W x 4 10dB Bass 100Hz Treble 10KHz Approx. 160x178 x 50 mm (d/w/h) Approx. 170 x 117. 5x16. 5 mm (d/w/h) 30~100 Approx. 2. 55kg IF Range 14. 4V DC (11-16V allowable) AM Tuner Section Frequency Range (Optional) 522-1620(KHz) (Europe) 530-1710 (KHz) (U. S. A. ) 450KHz chapter remain time Note: * The function is only valid on remote control. Press and hold 8 OSD to display the current setup. Note: * Press DISP on the head unit performs the same function. Usable Sensitivity 32dBuV (-20dB) Slow motion playback During VCD mode, press SLOW to slow forward or slow backward. There are speeds as follow:. 1/ 2 1/ 4 1/8 Dimensions TFT Sizes Setting the Playback Time During CD playback, firstly press 2 GOTO, and TFT shows : disc playback time:--:--, press your desired time of the playback by using number buttons. Secondly press GOTO button, the tracks time appears on TFT, also input your desired numbers to play the current time of your selection. During VCD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/sound/captions/angle /title time/chapter time/repeat playing /time option. Press [ ][ ] to select the options, press ENTER to set the status. Then press 23 NUMBER BUTTONS or [ ][ ] to set the current status. Note: DVD/VCD/CD Player Section VCD Signal System Frequency Response Signal-to-noise Ratio Separation Distortion AUTO/PAL/NTSC 20Hz to 20KHz 60dB 55dB(1KHz) 1% (Optional) Angle between folded and unfolded Weight Note: * The function is only valid on remote control. FM Section Tuning Range (Optional) 87. 5-108(MHz) (Europe) 87. 5-107. 9(MHz) (U. S. A. ) 65-74(MHz) (Russia) IF Range Usable Sensitivity (-30dB) 10. 7MHz 10dBuV TV Tuner Tuning Range Signal System Increase the size of the picture 48. 25-863. 25(MHz) PAL/NTSC During VCD mode, Press 9 ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum size is reached. 2X Note: Due to continuous product improvement, specifications and design are subject to change without prior notice. 3X 4X No Change Note: * The function is only valid on remote control. * To remove the image by pressing 27 button. * This function is operated by using the remote control. Signal-to-noise Ratio 50dB Stereo Separation Frequency Response 30dB 1KHz 20Hz-10KHz 10 31 07 VCD/CD Number Buttons Press one of 23 Number Buttons(0~9) to select a track to play automatically. Note: Installation Wiring Connection (Grey line with yellow head) (Grey line with Video Out 1 yellow head) (Light Grey line with Rear Wire Out red & white head) 02 Playing a VCD/CD Insert a VCD/CD disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. Note: * You can eject a disc by pressing button on the base or on the remote control or in the monitor. Video Out 2 Subwoofer (Optional) * This function is operated by using the remote control. [. . . ] 1/4 1/4 1/8 1/2 During DVD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/sound/captions/angle /title time/chapter time/repeat playing /time option. Press [ ][ ] to select the options, press ENTER to set the status. Then press NUMBER BUTTONS or [ ][ ] to set the current status. Note: EXIT In this menu to set the modes of AMS. When the setup is ON, the presettable stations are full, no new s is allowed. [. . . ]