User manual BOSS BV9980

[. . . ] E4 10R-021218 00 Contents 1 Before You Start Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 9 Specifications 11 Video Adjust Source Setup Others 19 19 19 5 2 Installation Wiring Connections 12 Install the Unit 13 Detach the Unit 14 Install the Front Panel 15 Detach the Front Panel 15 3 Common Operations Reset the Unit 16 Turning the Unit On/Off 16 Volume Control 16 Setting the Sound Characteristics EQ Setting 16 Turning Loudness On 16 Eject a Disc 17 Open the Monitor 17 Angle Setting 17 Mute Function 17 Clear 17 Mode Selector 17 Menu Setup Button 17 Infrared Sensor 17 Eject a Disc Compulsively 17 16 Playing a DVD 23 DVD Setup 23 Selecting Tracks Fast 23 Stop the Playback 23 Pause the Playback 23 Skip Backward/Forward/F. F/F. REW the Playback 23 Number Buttons 23 Repeat Playing 23 System Switch 24 Slow Motion Playback 24 Increase Picture Size 24 On Screen Display 24 Setting the Playback Time 24 Changing the Viewing Angle 24 Changing Audio Language 25 Changing the Subtitle Language 25 Selecting Menu 25 DVD Setup Menu 25 DVD 6 5 4 Main Menu Main Menu Setup Audio Adjust 18 2 18 Playing a MP3/USB/SD Disc 32 Selecting Tracks Fast 32 Repeat Playing 32 Number Buttons 32 Stop Playing 32 Selecting Tracks 32 Pause the Playback 32 Skip Backward/Forward/F. F/F. REW the Playback 33 On Screen Display 33 Exit an USB 33 Exit a SD Card 33 MP3/USB/SD 11 Additional Information Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . Contents 00 Problem No power. Some errors occur in the LCD or no function when pressing the button. Unable to receive stations. Poor effect on receiving a station. CDs cannot be loaded. . Cause/Solution Check and make sure whether the fuse is blown, replace with the proper value if necessary. [. . . ] Note: * The function is only valid on remote control. Slow motion playback During VCD mode, press SLOW to slow forward or slow backward. There are speeds as follow:. 1/ 2 LOUD (loudness) 1/ 4 1/8 1/16 Setting the Playback Time During CD playback, first press 2 GOTO, and TFT shows : disc go to:--:--, press your desired time of the playback by using number buttons. Secondly press GOTO button, track go to :--:-- appears on TFT, also input your desired numbers to play the current time of your selection. During VCD mode, press 2 GOTO button to set the playing time, when the TFT display : track/disc time/track time/repeat /time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press 23 NUMBER BUTTONS to set the current status. Note: Note: The function is only valid on remote * control. Increase the size of the picture During VCD mode, Press 9 ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum size is reached. 2X 3X 4X * This function is operated by using the remote control. No Change Note: The function is only valid on remote * control. * To remove the image by pressing 27 button. 10 35 07 VCD/CD Number Buttons Press one of 23 Number Buttons(0~9) to select a track to play automatically. Note: * This function is operated by using the remote control. * Press 22 CLEAR to clear the mistake input. Insert a VCD/CD disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. Note: * You can eject a disc by pressing EJECT button on the base or on the remote control or in the monitor. Before You Start Specifications General Power Requirement Load Impedance Max. Power Output Tone Controls During VCD/CD playback, firstly Press 18 button then press or to replay, press again to stop the playback. 18 Dimensions Note: * Press in the monitor performs the same function. TFT Sizes 85W x 4 10dB Bass 100Hz Treble 10KHz Approx. 160x178 x 50 mm (d/w/h) Approx. 170 x 117. 5x16. 5 mm (d/w/h) IF Range 14. 4V DC (11-16V allowable) 01 Playing a VCD/CD AM Tuner Section Frequency Range (Optional) 522-1620(KHz) (Europe) 530-1710 (KHz) (U. S. A. ) 450KHz Selecting Tracks Fast During VCD/CD playback, first press 21 to return to the beginning of the current track, press 21 again within 3 seconds to play previous track , press 21 to play next track . Note: * Pressing and button on the head unit or and in the monitor also performs the same function. Stop Playing ¼òµ¥ÕϳýÄÏ ¹ÊÅÅÖ¸ Usable Sensitivity 32dBuV (-20dB) DVD/VCD/CD Player Section VCD Signal System Frequency Response Signal-to-noise Ratio Separation Distortion AUTO/PAL/NTSC 20Hz to 20KHz 60dB 55dB(1KHz) 1% Repeat Playing During VCD/CD playback , press 15 RPT to perform replaying function, first press it to replay the current track, press it again to cancel this function. Note: * This function is operated by using the remote control. * The default setting is Disc Repeat. Pause the Playback During VCD/CD playback, press switch between play and pause. Note: to Angle between 30~100 folded and unfolded Weight Approx. 2. 3kg FM Section Tuning Range (Optional) 87. 5-108(MHz) (Europe) 87. 5-107. 9(MHz) (U. S. A. ) IF Range Usable Sensitivity (-30dB) 10. 7MHz 10dBuV Note: Due to continuous product improvement, specifications and design are subject to change without prior notice. * Press in the monitor or on the head unit performs the same function. Skip backward/forward/F. F /F. REW the playback Press 20 ( or ) on remote control to perform fast reward or fast forward. Each press will change as the following: 2X 4X 8X 16X Playing Tracks at Random During VCD/CD playback, press 16 RDM button on the remote control to play any track at random under the directory which you select. Note: * This function is operated by using the remote control. Signal-to-noise Ratio 50dB Stereo Separation Note: Frequency Response 30dB 1KHz 20Hz-10KHz * Press and in the monitor performs the same function. 11 34 02 Installation MP3/USB/SD Skip backward/forward/F. F /F. REW the playback 06 Wiring Connection Video Out 2 Video Out 1 Rear Audio Out Front Audio Out (Grey line with yellow head) (Grey line with yellow head) (Light Grey line with red & white head) (Dark Grey line with red & white head) Subwoofer (Brown line with brown head) Reverse Video (Brown line with yellow head) Input During MP3/USB/SD mode, Press 20 ( or ) on remote control to perform fast reward or fast forward. Each press will change as the following 2X 4X 8X 16 X Antenna 4 3 5 1 Note: * Press and in the monitor performs the same function. 6 On Screen Display 2 Hold and press OSD button to display the current time. Note: * This function is operated by using the remote control only. Reverse Trigger (+) Ignition Key Constant 12 Volts Negative Ground Rear L Speaker Front L Speaker Orange Brown Red Yellow Choke Black Box Parking Brake (-) Illuminating control To power Antenna Rear R Speaker Front R Speaker Pink Blue Violet/Black Violet Grey/Black Grey 4 5 6 Exit an USB During USB mode, the main unit would switch to SD or DISC mode, if the previous status is SD or DISC, otherwise the main unit would switch to TUNER mode when exit the USB. [. . . ] * The number in the 2 mark on a DVD's package indicates the number of recorded subtitle languages. 25 05 DVD System Switch During playback mode, Press P/N on remote control to switch to PAL or NTSC or AUTO system. AUTO PAL NTSC Main Menu Press and hold 8 OSD to display the current time. Note: * This function is operated by using the remotecontrol only. LOCAL AREA LOCAL GOTO FREQ 04 Local AMS Fullup DVD Playback Setting During DVD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/audio/subtitle/angle /title time/chapter time/repeat /time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press NUMBER BUTTONS or [ ][ ] to set the current status. [. . . ]