User manual BOSS BV9985

[. . . ] 00 Contents 1 Before You Start Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 9 Specifications 11 5 2 Installation Wiring Connections 12 Install the Unit 13 Detach the Unit 14 Install the Front Panel 15 Detach the Front Panel 15 3 Common Operations Reset the Unit 16 Turning the Unit On/Off 16 Volume Control 16 Setting the Sound Characteristics EQ Setting 16 Turning Loudness On/Off 16 Eject a Disc 17 Open the Monitor 17 Angle Setting 17 Mute Function 17 Clear 17 Mode Selector 17 Menu Setup Button 17 Infrared Sensor 17 Eject a Disc 17 16 Playing a DVD 23 DVD Setup 23 Selecting Tracks Fast 23 Stop the Playback 23 Pause the Playback 23 Skip Backward/Forward/F. F/F. REW the Playback 23 Number Buttons 23 Repeat Playing 23 System Switch 24 Slow Motion Playback 24 Increase Picture Size 24 On Screen Display 24 Setting the Playback Time 24 Changing the Viewing Angle 24 Changing Audio Language 25 Changing the Subtitle Language 25 Selecting Menu 25 DVD Setup Menu 25 DVD 6 4 5 Main Menu Main Menu Setup 18 Audio Adjust 18 Video Adjust 19 Source Setup 19 Others 19 2 Playing a MP3/USB/SD Disc 32 Selecting Tracks Fast 32 Repeat Playing 32 Number Buttons 32 Stop Playing 32 Selecting Tracks 32 Pause the Playback 32 Skip Backward/Forward/F. F/F. REW the Playback 33 On Screen Display 33 Exit an USB 33 Exit a SD Card 33 MP3/USB/SD 7 Playing a VCD/CD Disc 34 Selecting Tracks Fast 34 Repeat Playing 34 Playing Tracks at Random 34 Number Buttons 34 VCD/CD 12 Additional Information Simple Troubleshooting Guide The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below . Contents 00 Problem No power. Some errors occur in the LCD or no function when pressing the button. Unable to receive stations. Poor effect on receiving a station. CDs cannot be loaded. . Cause/Solution Check and make sure whether the fuse is blown, replace with the proper value if necessary. [. . . ] It is switched to mono mode when MONO appears. ST OFF appears on the display to switch to MONO compulsively. Note: It is only valid on remote control. * * Switch to MONO compulsively to improve the listening quality when week signal. * It is only valid in FM tuning. Scanning/Memorizing Stations Automatically During radio status, briefly press 4 AMS button on the remote control to scan each stored station 5 seconds respectively which stored in 23 Number Buttons (from 1 to 6). You can press the corresponding Number Buttons or AMS button when your desired station is charged. When press and hold 4 AMS button for more than 2 seconds, it will activate automatically memory storing function. The radio automatically selects a station and has it stored in any one of the 23 Number Buttons (from1 to 6). Note: * The unit can be stored up to 6 stations for each band. * It is only valid on remote control. 3 Press and hold another number button more than 2 seconds when listening in a station in one number button's, the station will be stored in that number button. Note: * Press 5 in the monitor performs the same function. 12 7 28 29 On Screen Display During radio mode, briefly press 8 OSD to enter RDS SETUP, press and hold it to display the edition information and the LCD display the current time. Note: * Press 7 in the monitor to enter RDS SETUP. Tips: For more information as to replacing battery, please refer to Replacing the Battery on page 6. 40 9 01 Before You Start SOURCE/PWR GOTO (playing time/track) BAND/TITLE AMS/MENU (Previous/Next Track) LOC/SUB -T ST/AUDIO (mono or stereo/language or channel selector) PTY/ANGLE TA/LOUD (traffic alarm/loudness) OSD Briefly press it to show the current information, press and hold it to set the current information. ZOOM (to increase the picture) BT (bluetooth mode) Button SLOW (Slow Forward/Reward) P/N( system adjusting) (Dial, last phone, answer a phone) Mute (Hang up/refuse a phone) PROG(Program playing) 30 Tuner (Pause/Play) (Stop Playing) 09 Band Selector During radio status, repeatedly press 3 BAND button to select bands in the following order: 4 Listening to the radio 1 FM1 2 CH:1 3 87. 50MHz SETUP (F. R/F. F) FM1 AM2 FM2 FM3 AM1 87. 50M 87. 50M 107. 90M 106. 10M 5 90. 10M 98. 10M CLEAR 0~9 (Number) Buttons (Eject Button) Note: * Press BAND on the head unit or 6 in the monitor performs the same function. 9 6 8 10 7 Manual/Automatic Tuning Manual Tuning: Press ( or ) button on the remote control continuously to select a station downward or upward respectively. Automatic Tuning: Press and hold ( or ) button for more than 3 seconds, the radio automatically searches a station downward or upward respectively and plays when it finds a station. Note: in the * Press / on the head unit or monitor performs the same function. 1 Band Indicator AF/EQ (alternative frequency/equalizer) Button ENTER (Left/Right/Up/Down ENTER) Shows which band the radio is tuned to. 2 Preset Number Indicator Shows what preset has been selected. 3 Frequency Indicator Shows which frequency the tuner is tuned. 4 SEEK+/SEEK- PAIR During bluetooth, press it to pair. Briefly press to tune by the presettable range, hold and press to tune automatically. 5 The 6 stations of the current band. DX/LOC Selector During radio status, press 5 LOC button to select strong or weak station reception. LOC ON appears on the display and only local station is available. LOC OFF appears on the display both distance and local stations can be received. Note: * The function is only valid on remote Briefly press to select station, hold and press to save the current station to one of the 6 stations. 6 BAND VOL+/VOL-/SEL RPT(Repeat Playing) RDM (Playing Tracks at Random) To select the bands. 7 RDS Press it to enter RDS SETUP. 8 MENU control. * The function is invalid in AM tuning. Press this button to set the main menu. 9 SRC Selecting the Stored Station During radio status, press 27 button to select the stored station upward, press to select the stored station downward. Note: * The function is only valid on remote control. 39 Press this button to select the signal source. 10 BLUET Press this button to switch to the bluetooth interface. 10 08 MP4(AVI, MPEG4) Note: * The function is only valid on remote Before You Start Specifications General AM Tuner Section 14. 4V DC (11-16V allowable) Frequency Range (Optional) 522-1620(KHz) (Europe) 530-1710 (KHz) (U. S. A. ) IF Range 450KHz 01 Selecting Tracks Fast During MP4(AVI, MPEG4) playback, first press 21 to return to the beginning of the current track, press 21 again within 3 seconds to play previous track , press 21 to play next track . Note: control. * To remove the image by pressing 27 button. Changing audio language (Multi-audio) With MP4(AVI, MPEG4) disc featuring multi-audio recordings, you can press 6 AUDIO to switch between language and audio systems during playback. Selection options switch as follows: AUDIO 1 AUDIO 2 AUDIO 3 . . . . . . Power Requirement Load Impedance Max. Power Output Tone Controls * Pressing and button on the head unit or and in the monitor also performs the same function. 85W x 4 10dB Bass 100Hz Treble 10KHz Skip backward/forward/F. F /F. REW the playback Press 20 ( or ) on remote control to perform fast reward or fast forward. Each pressing will change as follow 2X Note: 4X 8X 16X Usable Sensitivity 32dBuV (-20dB) Note: Dimensions TFT Sizes * Press and hold and button on the head unit or and in the monitor also performs the same function. * This function is operated by using the remote control. * This function only operates with disc featuring multi-audio recordings. * The number in the 2 mark on a disc package indicates the number of recorded languages/audio systems. Approx. 160x178 x 50 mm (d/w/h) Approx. 170 x 117. 5x16. 5 mm (d/w/h) DVD/VCD/CD Player Section VCD Signal System Frequency Response Signal-to-noise Ratio Separation Distortion AUTO/PAL/NTSC 20Hz to 20KHz 60dB 55dB(1KHz) 1% Angle between 30~100 folded and unfolded Weight Approx. 2. 3kg Playing Tracks at Random During MP4(AVI, MPEG4) playback, press 16 RDM button on the remote control to play any track at random under the directory which you select. Press it again to cancel this function. Note: Changing the subtitle language (Multi-subtitle) With MP4(AVI, MPEG4) disc featuring multi-subtitle recordings. You can press 5 SUB-T to switch between subtitle languages during playback. [. . . ] You also can press 27 or 23 button to select your desired chapter. Note: Changing audio language (Multi-audio) DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can press 6 AUDIO to switch between language and audio systems during playback. Selection options switch as follows: AUDIO 1 AUDIO 2 AUDIO 3 . . . . . . NTSC * This function is operated by using the remote control only. DVD Playback Setting During DVD mode, press 2 GOTO button to set the playing time, when the TFT display : title/chapter/audio/subtitle/angle /title time/chapter time/repeat /time disp. Press [ ][ ] to select the options, press ENTER to set the status. [. . . ]