User manual BOSS BVTS4

[. . . ] A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). [. . . ] It may damage the USB Stick and sometimes will caused the unit system lock up. The unit can support playback Music Player which have USB Interface. However due to the fast changing decoder technology and different kind of hardware interface. This unit may or may not be compatible to all the Music Player and USB Stick especially those USB Stick / Player which require to install a program driver. About Music Flash Player with USB Interface, Usually, the unit takes longer time to read this kind of player than normal USB Stick. Especially, if the Flash Player with built-in power battery sometimes takes 20-30 seconds to start up the playback The unit is not compatible to playing any Portable Hard disk. Music File Playback Operation All the USB playback operation function is same as the operation on CD/MP3/WMA. Please refer to 'CD/MP3/WMA Operation' for more details. 17 14. MEMORY CARD OPERATION The unit can support playback MP3 and WMA Audio format which are stored into SD and MMC Memory Card . Pls read below before you start the operation of Memory Card Inserting and Removing a SD or MMC card on the main unit 1 Face Up 2 3 Click Detach the Front Panel Insert the Memory Card with Label up side Inserting the SD or MMC card Push in till heard a "click" 1 2 3 Click Detach the Front Panel Push in till heard a "click" Removing the SD or MMC card Remove the Memory Card Mode change to MEMORY CARD After a SD or MMC card was inserted into the main unit card slot. Press Mode button to select Mode . The unit will display for a while then starts The files contained on the Memory Card. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru > for selection of the storage media. 3. Once selected the storage media, Press the AUDIO button as confirmation to transfer the Playing file. If no further button is press within a 10 second time out, the unit will automatically resume to the previous mode. 4. If the unit detect the selected media memory capacity is used up, will be displayed on the LCD for a while then automatically resume to the previous mode. 5. After pressing AUDIO button to start the transfer, the playing music file will stop and the transferring will start at the same time. (The following step is an example of if selected USB) 6. Under transfer is processing, the LCD will display . 7. When the file transfer is completed, the LCD will display for a while and automatically playback the present music file which have been transferred. The transferred Music file is automatically saved as a file into the Folder "MY_MP3 " or "MY_WMA" by the advance "File Management. " system of this unit. Tips For more details information of File Management system of this unit , Please see "FILE MANAGER''. Under transferring mode, All the MP3/WMA operation is not functional, like file up / down, Repeat, Random, and Intro etc. The audio will remain recording by the unit system even MUTE function is activated The Transferring will automatically stop if the storage device memory is less than 2MB WARNING: 1) Never remove the USB Stick while recording or file transferring to USB Stick. [. . . ] If the Audio device is not able auto start playing song after changed mode into "BT AUDIO" mode, user may need to operate the PLAY mode on the audio device to start the song playback. (2) Track up / down - by pressing the Track up / down buttons on this unit. (3) Pause / Play ­ by pressing the Pause / Play button on this unit. (4) Volume up / down ­ by rotating the encoder knob on this unit. [. . . ]