User manual BOSS CD-3030R

[. . . ] Avoid installing the unit in a location which is subject to high temperatures, direct sunlight, hot air from such sources as heaters or exhaust lines, or where it will be subject to contact with dust, dirt, moisture or excessive vibration. 1 i FORMING THE SUPPORT BRACKET 5 x 25mm suppon screw Bend the backstrap to conform to the mounting case and the dashboard surface to which you plan to secure the backstrap. Slide one of the utility holes on the backstrap onto the support screw and fasten it with the spring washer and nut provided. Using the 5 x 25mm screw and the plain washer, secure the backstrap to the dashboard surface as shown in the diagram. [. . . ] LOUDNESS Press and hold to increase the level of bass output. ~ / - i I I I i 1 Cantrobs behind *aceplate STATION PRESETS Press any preset to select a station. To store a station in memory, tune to it, and press and hold your choice of preset button for several seconds. '1 . L-- SCN Press and hold this button to engage function which will search for stations, playing each for five seconds before moving to next station. TUNEITRACK BUTTONS Press and release to activate automatic seek function ("AUTO" will appear on display). Press and hold to engage manual tuning mode ("MANUL" will appear on display). -- LOC Press to select between strong (LOC) and weak (DIST) stations. B A N D Press repeatedly to change between three FM bands/one AM bands. I - CD Loading/unloading slot LED This LED flashes when the faceplate is removed. RESET BUTTON Press this button with a ballpoint N0TE:Iftheunitdoesnot unctronproperly penorotherthinobject. Useit: a ter you have pressed t i e RESET button, after initial installation of the unit, cfean the socket and the connector on the when all wiring is complete rear of the front panel with a cotton swab when the function buttons do not operate soaked in isopropyl alcohol and try again. , when the display is showing "ERROR', . . 7 MP3 Pllayback Since MP3 files are named and accessed differently than CD files, it is necessary to employ some of the buttons for purposes of searching for and selecting audio files. The AS/PS button is used to select the search mode by pressing it once or twice. Search Track Directory Mode Pressing the AS/PS button once enters the Searching Track Directorv mode. To enter a track number, use the buttons according to the chart belo\ Front panel control Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Source I<< >>I DSP I TUNEDRACK BUlTONS Press and release to advance to next track or to return to the beginning of the current track (track number will be displayed). Press and hold to fast forward or reverse. Plav will beain at the point when you releaseihe butt&. Press again to resume playback. 1 1 ; ElECT To eiect CD, first Dress OPEN tb slide face down, then EJECT to stop and eject CD. SHUFFLE Press to play ALL tracks on the CD in random order. I ~ REPEAT Press and release to continuously repeat same track. Press again to stop repeat cycle. - Search File Name Mode CD SCAN Press to hear first several seconds of each track on current disc. Press again to stop intro and listen to intro last previewed. Pressing the AS/PS button twice enters the Searching File Name mode. The unit searches for files whose names have the same characters inputted by the user. The unit displays these sorted files and directories. This system uses the buttons according to the chart below. The selected file can be played by pushing the BAND/LOUD button. Front panel control Band/Loud Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Source I<< T o PLAY a C D gently insert a CD with the label side up into the disc slot. [. . . ] Disc is dirty or defective. Adjust installation angle to less than 30° from horizontal. Press the RESET button. Keys on front panel do not operate. The built-in microprocessor is not operating properly due to noise. Front panel is not properly fixed in place. Remove front panel, press RESET button, and re-insert front panel. [. . . ]