User manual BOSS CH10

[. . . ] 5 Detaching the control panel . . . . . . . . . . . . . . 7 Changing the control panel . . . . . . . . . . . . . . . 8 Electric Connection . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] wallpaper: 11" , in the "AUTO" mode, the monitor of unit will change the background color automatically . SEL A Revolve : clockwise to increase / Anticlockwise to decrease . Touch screen VOLUME+ Touch the screen the VOLUME+ to increase the volume level . Touch the screen the VOLUME- to decrease the volume level . -16- VOLUME- Basic Operation TFT Monitor Adjustment During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on front panel ) to access the Picture mode selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Volume Buzzer Tint Contrast Bright Bass Treble Balance Fade Color Rear View Camera When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only. ) Audio Quality Adjustment During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on the front panel ) to access the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Volume Bass Treble Balance Fade Contrast Bright Color BRIGHT MODE 16 Buzzer MUTE ON Tint VOLUMESEL VOLUME+ FLAT 12: 18 DISC-IN touch to select touch to adjust ADJUSTABLE ITEMS: COLOR: 0 to 32 Adjust the color for the picture-lighter or darker. BRIGHT: 0 to 32 Adjust if the picture is too bright or too dark. CONTRAST: 0 to 32 Adjust the contrast of the bright and dark portion. TINT: 0 to 32 Adjust the tint if the human skin color is unnatural. The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . Scan Function In Radio mode, briefly touch the APS section on the touch screen , the radio briefly plays all the preset stations of the frequency band . APS FM1 MODE 1 2 3 SEL 87. 60 MHZ MUTE ON 4 5 6 RDS FUNCTION In Radio mode, touch it to select the desired item, it will display the following as below : FLAT 12:06 ST NO-DISC AF DX VOLUME- VOLUME+ Touch to preset station -Store in Memory > Select the frequency band > Select the station > Keep the desired memory key pressed in until the station is heard again after a brief interruption . -Retrieve a preset station Touch the 1-6 sections briefly to retrieve a station which had been stored in the memory in advance the chose number is shown on display . FM1 BND TA PTY AF CLK 87. 60 MHZ S-WOOFER LUD APS LOC/DX DSP STEREO/MONO TA Traffic Announcement (Priority For Traffic Information) In Radio mode, touch briefly the screen of "TA" range to activate the TA function. Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. TA Automatic Memory Storing & Program Scanning Automatic Preset Setup APS In Radio Mode, Touch and keep the APS section on the touch screen for about 2 seconds to active automatic station storage. The radio searches within the current frequency band, -20- Radio Operation When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. [. . . ] -33To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback. Other Main Operation SD/MMC card OPERATION The unit can support playback MP3/WMA/JPEG/MP4 and Divx format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card . Inserting and removing a SD or MMC card on the front panel of unit . [. . . ]