User manual BOSS CH103DVC

[. . . ] 5 Detaching the control panel . . . . . . . . . . . . . . 7 Changing the control panel . . . . . . . . . . . . . . . 8 Electric Connection . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Bass: -14 to +14 Adjust bass level by using VOL + / - . Treble: -14 to +14 Adjust treble level by using VOL + / - . -17- Basic Operation Balance: R 0-10 to L 0-10 . Adjust sound balance between left and right speakers by using VOL + / - . Adjust sound balance between front and rear speakers by using VOL + / VOL - . The RESET button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. All the function buttons do not operate. Error symbol on the display. Setting Audio Modes USA/EURO FREQUENCY SWITCH Touch the screen the DSP range DSP (or press the EQ button on the remote control ) to select one of the preset sound modes . The information will display in the monitor as follow : POP FLAT FLAT 16: 18 On the right of this device, there is a USA/EURO frequency switch, you can select the desired radio frequency before installing . ROCK JAZZ CLASSIC DISC-IN ROCK RANDOM S-WOOFER OSD REPEAT TA DSP AF USA/EURO Frequency Switch (radio frequency switch for selecting between the USA and EUROPE frequency band. ) INTRO CLK LUD GOTO touch to select It`s depend on your habit to select the Audio mode . Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. RET RESET -18- Radio Operation Listening to the Radio Switching To Radio Mode Touch the screen of "MODE" range (or press the MOD button on the front panel ) repeatedly to select the RADIO mode. the following information will appears as below: MODE FLAT ST 12:06 TA NO-DISC MHZ select the band , the message will show in turn : FM1 FM2 FM3 AM1(MW1) AM2(MW2) Start Searching For a Station Manual Search During Radio mode, briefly touch the screen of " " section or press the " " on front panel to increase frequency by one step of channel spacing . This does switch off the TA mode . PTY Note : the status of the AF function is shown by an AF symbol in the display. If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment . In Radio mode, touch the screen of "PTY" range to select the Program type . AF FUNCTION (Alternative Frequencies) In Radio mode, touch briefly the screen of "AF" range to activate the AF function. Touch it again to turn off the AF function . AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into . AF PTY Selection of the program type besides the stations name, some FM stations also transmit information on the type of program. This information can be displayed by your car radio . Examples of such types of program are : SPORT NEWS POP WEATHER . . . . . . With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message "PTY SEEK" then appears briefly in the display . [. . . ] -35To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback. Other Main Operation SD/MMC card OPERATION The unit can support playback MP3/WMA/JPEG/MP4 format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card . Inserting and removing a SD or MMC card on the front panel of unit . [. . . ]