User manual BOSS CH12

[. . . ] 5 Detaching the control panel . . . . . . . . . . . . . . 7 Changing the control panel . . . . . . . . . . . . . . . 8 Electric Connection . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Touch screen VOLUME- Touch the screen the VOLUME+ to increase the volume level . Touch the screen the VOLUME- to decrease the volume level . VOLUME+ -16- Basic Operation TFT Monitor Adjustment During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on front panel ) to access the Picture mode selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Volume Buzzer Tint Contrast Bright Bass Treble Balance Fade Color Rear View Camera When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only. ) Audio Quality Adjustment During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on the front panel ) to access the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor ) SEL Volume Bass Treble Balance Fade Contrast Bright Color FLAT 12: 18 DISC-IN DVD 6-0:00:18 MODE MUTE ON Buzzer Tint VOLUME- SEL VOLUME+ FLAT 12: 18 DISC-IN touch to select touch to adjust ADJUSTABLE ITEMS: COLOR: 0 to 32 Adjust the color for the picture-lighter or darker. BRIGHT: 0 to 32 Adjust if the picture is too bright or too dark. CONTRAST: 0 to 32 Adjust the contrast of the bright and dark portion. TINT: 0 to 32 Adjust the tint if the human skin color is unnatural. -Adjustable when " NTSC " is selected for " NTSC/PAL " . DVD 6-0:00:18 MODE MUTE ON VOLUME- SEL VOLUME+ touch to select touch to adjust ADJUSTABLE ITEMS: Volume: 0 to 32 Adjust volume level by using VOL + / - . Bass: -14 to +14 Adjust bass level by using VOL + / - . The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below : -Store in Memory Touch and keep the 1-6 sections (or press and hold the / CH 1-6 ) for about 2 seconds, the current listening station will be stored into the number location . -Retrieve a preset station Touch the 1-6 sections briefly (or press the / CH1-6 button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display . RDS FUNCTION In Radio mode, touch it to select the desired item, it will display the following as below : FLAT ST 12:06 NO-DISC AF DX FM1 BND TA PTY AF CLK 87. 60 MHZ S-WOOFER LUD APS LOC/DX DSP STEREO/MONO TA Traffic Announcement (Priority For Traffic Information) In Radio mode, touch briefly the screen of "TA" range to activate the TA function. Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. TA Automatic Memory Storing & Program Scanning Automatic Preset Setup APS In Radio Mode, Touch and keep the APS section on the touch screen for about 2 seconds to active -20- Radio Operation When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. PTY FUNCTION Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode . PTY Note : the status of the AF function is shown by an AF symbol in the display. [. . . ] Touch the screen of " " section or press the " " button on the remote control to choose the channel downward . - The numeric button (0-9) on the remote control allow you to select the corresponding channel directly. Note: In TV mode, the +10 button is not available. -34- Other Main Operation SD/MMC card OPERATION The unit can support playback MP3/WMA/JPEG/MP4 format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card . Inserting and removing a SD or MMC card on the front panel of unit . [. . . ]