User manual BOSS CH8

[. . . ] 5 Detaching the control panel . . . . . . . . . . . . . . . 7 Changing the control panel . . . . . . . . . . . . . . . 8 Electrical Connection . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Touch Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Unit Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (The corresponding value will show on the monitor ) SEL Volume Bass Treble Balance DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOL- SEL VOL+ touch to select touch to adjust Volume Bass Treble Balance Buzzer Tint Contrast Bright Fader Color Buzzer Tint Contrast Bright Fader Color DVD LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOL- SEL VOL+ ADJUSTABLE ITEMS: COLOR: 0 to 32 Adjust the color for the picture-lighter or darker. BRIGHT: 0 to 32 User can use the Vol+/- knob to adjust the brightness level from 0 to 32 . CONTRAST: 0 to 32 To adjust the contrast of the bright and dark portion. TINT: 0 to 32 Adjust the tint if the human skin color is unnatural. -Adjustable when " NTSC " is selected for " NTSC/PAL " . 17 touch to select touch to adjust It`s depend on your habit to setup the data . ADJUSTABLE ITEMS: Volume: 0 to 32 Adjust volume level by using VOL + / - . Bass: -14 to +14 Adjust bass level by using VOL + / - . Treble: -14 to +14 Adjust treble level by using VOL + / - . Basic Operation Balance: R 0-10 to L 0-10 . Adjust sound balance between left and right speakers by using VOL + / - . Adjust sound balance between front and rear speakers by using VOL + / VOL - . The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below : -Store in Memory Touch and keep the 1-6 sections (or press and hold the /CH 1-6) for about 2 seconds, the current listening station will be stored into the number location . -Retrieve a preset station Touch the 1-6 sections briefly (or press the /CH1-6 button repeatedly) to retrieve a station which had been stored in the memory in advance the chose number is shown on display . 20 In Radio mode, touch it to select the desired item, it will display the following as below : FM1 ST 106. 30 MHz DX TA CH 6 LUD SWF SWF LUD TA POP DISC DSP 11:08 CLK AF PTY TA Traffic Annonuncement (priority For Traffic Information) In Radio mode, touch the TA section briefly (or swing the SEL knob briefly in the TA/AF direction) , to activate the TA function. Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . TA Radio Operation During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . AF FUNCTION (Alternative Frequencies) In Radio mode, touch the AF section briefly (or swing and hold the SEL knob in the TA/AF direction) , to activate the AF function. [. . . ] Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode. you can also select the desired item of the USB device . The buttons on the remote control, on the device, have the same functions as the touch buttons of this touch screen have . Important Note: To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback. In USB Playback mode Use the UP, DOWN, RIGHT or LEFT buttons to navigate to and select files to play, and press ENTER to begin playback (or viewing, in the case of JPEG files). [. . . ]