User manual BOSS CHAOS SE152DVC

[. . . ] To enjoy optimum sound, handle the disc as follows. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). There are paste residue. Ink is sticky (P . 5). ******* **** ******* ******* ******* P1 . [. . . ] - BEEP MODE (BEEP ON / OFF) BEEP OFF: disable audible beep tone when any function is accessed. BEEP ON: enable audible beep tone. - SEEK MODE (SEEK 1 / SEEK 2) You can choose from Seek tuning mode 1 & mode 2 by using Volume Control. While the desired Seek tuning mode is selected, the following operations can be performed: SEEK1: Press the Tuning Up / Down Button briefly to increase or decrease the frequency by 1 step size. Press and hold the Tuning Up / Down button to seek the band in up or down direction and stop when a station is received. SEEK2: Press the Tuning Up / Down Button briefly to increase or decrease the frequency by 1 Step size. Press and hold the Tuning Up / Down button increase or decrease the frequency rapidly until the button is released, the different between the same operation at SEEK 1 mode is that this time the radio will not stop at any station. 2) ENCODER VOLUME KNOB When the Menu function is not activated, rotate this knob to change the volume level. When Menu function is activated, rotate this knob to navigate through different menu items. 16) SOURCE BUTTON Press this button to select different mode , sequence as follow: A) Tuner mode (Radio) B) CDP / MP3 (only if a CD or MP3 disc is inserted) C) USB (only if a USB drive is inserted) D) SD / MMC (Only if a SD or MMC card is inserted) E) AUX IN (only if this unit with this features) MODE PRIORITY Whenever a USB or SD/MMC is being inserted, unit will automatically switch to USB or SD/MMC mode, does not matter the unit is currently in what mode. When in USB or SD / MMC mode, if the USB or SD / MMC is being removed, unit will automatically switch to radio mode. E-8 3) DISPLAY BUTTON (DISP) At Radio mode Press this button to view frequency of the station in listening and clock time . Clock Adjustment Under clock display mode, press DISP button until the LCD flashes, press VOLUME UP/DOWN to adjust hour & minute. 15) SCAN BUTTON(SCAN) Press this button, the radio will tune up to search stations, the available stations will blinking and stay on the display for a few seconds. 17) DSP BUTTON (PRESET EQUALIZER) POP -> ROCK -> CLASSIC -> FLAT -> DSP OFF At DSP off mode preset equalizer will be controlled by Bass / Treble setting. Flip open the USB plastic cover, and the USB socket will become accessible. 2) Plug in the USB drive / device completely in the correct direction / orientation, and display will show "USB-DRIV" to indicate that the USB drive / device is being plugged in correctly & the download has begun. (P . 2) NOTE: P . 2 The unit may take a while to detect or download the USB files, detect & download time may vary depends on the type of USB drive / device. 3) Once the USB drive / device has been plugged in, unit will automatically switch to USB mode, does not matter what mode it is currently in. 4) To stop USB playback, unplug the USB drive / device gently from the unit. Once the USB drive / device is unplugged, the unit automatically switch to radio mode. Or user can use mode button to switch to other mode. 5) User can use the mode button to choose USB mode (only if USB drive / device is inserted in the unit ) or any other modes, when they are in any mode. P . 3 6) Please refer to section 7 (CD operation) & section 11 (MP3 operation) on how to use possible function for USB files playback. All the USB files playback function is same as normal CD or MP3 disc playback. 7) Always close the USB plastic cover after unplugged the USB drive / device in order to keep the USB socket in good condition. (P . 3) PLAY PRIORITY Does not matter the unit is in what mode (TUNER, CD, SD/MMC, etc), once a USB drive / device is being plugged into the unit, unit will automatically switch to USB mode. E - 11 WARNING UB S 1) Please never try to fold down the front panel when there is an USB drive / device is plugged in on the front panel. [. . . ] Repeat this procedure to navigate through the folders up to 8 levels deep. During folder search, not only folders are shown but also the tracks, but they can be easily identified because they have their own icon display on LCD. E - 14 4. Searching by character This model also has song name (character) search function for MP3 disc playback, Press MP3 search button three times until "CHAR SCH" is shown on display, then press Enter button once, character "A blinks, use volume up or down to select desired character (1st " letter), press Enter button to confirm your choice and second character "A blinks to select " other letters (max, 8 characters). After entering your song name, press Enter button more than 1 second to start the search. [. . . ]