User manual BOSS CHAOS SE12S

[. . . ] A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. To keep the disc clean, do not touch the surface (P . 1). NOTES ON DISCS If you use the discs explained below, the sticky residue can cause the CD to stop spinning and may cause malfunction or ruin your discs. Do not use second-hand or rental CDs that have a sticky residue on the surface (for example, from peeled-off stickers or from ink, or glue leaking from under the stickers). There are paste residue. [. . . ] Beep Tone The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed on the face of the radio. "BEEP TONE On" is the default display. Rotate the volume control to select the "BEEP TONE Off" option. Illumination Color (COLOR) This option allows selection between two colors for the backlight illumination of the unit. "COLOR 1" is the default display and will illuminate the unit in blue backlight. Rotate the volume to select "COLOR 2", , which will illuminate the display in red backlight. Selectable Clock Display (CLK ON LCD) When the selectable clock display feature is activated, the clock and default greeting note will appear in the display when the radio is turned off but the ignition switch is still on . "CLK ON LCD On" is the default display for this option. To select that the clock and greeting not be displayed when the unit is powered off, rotate the volume control to select "CLK ON LCD Off". Key Illumination On/Off (KEY LIGHT) The Key Light on/off feature controls how the front panel buttons illuminate when the unit is turned off, but the ignition switch is on. When the Key Light feature is activated with the unit turned off and the ignition turned on, the front panel buttons will illuminate. The radio pauses for 5 seconds at each strong station. Press SCAN button again to listen to the current station. 7) PRESET STATIONS BUTTONS Six numbered preset buttons store and recall stations for each band. Store a Station Select a band (if needed), then select a station. The preset number will appear in the display. Recall a Station Select a band (if needed). Press a preset button to select the corresponding stored station. 11) AUTOMATICALLY STORE / PRESET SCAN (AS/PS/ID3) Automatically Store Automatically select 6 strong stations and store them in the current band. Press AS/PS button for more than three seconds. The new stations replace stations already stored in that band. Preset Scan Scan stations stored in the current band. [. . . ] User can also press the AS/PS button repeatedly to view the ID3 tag information manually. NOTE OF ID3 ICONS ON DISPLAY ICON DESCRIPTION FOLDER ICON FILE ICON TRACK ICON ARTIST ICON ALBUM ICON E - 18 11. REMOTE CONTROL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 OPERATIONS: Key 1. Track Up/Down Radio Mode Power On/Off CD Player Mode Power On/Off MP3/WMA Player Mode Power On/Off Adjust Vol, Bas, Tre, Fad, Bal Mute Select Vol, Bas, Tre, Fad, Bal Adjust Vol, Bas, Tre, Fad, Bal Mute Select Vol, Bas, Tre, Fad, Bal Adjust Vol, Bas, Tre, Fad, Bal Mute Select Vol, Bas, Tre, Fad, Bal & MP3 Enter Tuning/Seek Up/Down Track Up/Down Track Up/Down 6. Xbass(Xbs) & Xbass & Sub-woofer(SUB-W) Sub-woofer Xbass & Sub-woofer Preset EQ CD Eject Display Clock, Spectrum Or animation or PTM /menu function Xbass & Sub-woofer Preset EQ CD Eject Display Clock, Spectrum Or animation or PTM /menu function 7. [. . . ]