User manual BOSS DVD-8000

[. . . ] Built In TV Tuner · PLL Tuning System · 12R Bus Control Use Authorized Service Center Do not attempt to disassemble or adjust this precision product. Please local a service center in your area for service assistance. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Car Washing Do not expose the product to water or excessive moisture. [. . . ] DVD:Normal Playback X2 X4 X16 X100 VCD/CD/MP3: Normal Playback X2 X4 X8 Slow Motion Playback (For DVD Only) Press / during playback. Each time the button is pressed, the speed of slow forward/reverse changes according to the disc as follows. DVD: X1/32 X1/16 X1/8 x1/4 x1/2 In slow motion state, press on the remote control to recover normal playback. Skipping Track Press / buttons on the remote control or T-UP/T-DN buttons on the front panel during playback. Press to or T-UP to skip to the next track, and press or T-DN to skip to the previous track. Note: For some VCD2. 0 discs (PBC-playback control), / buttons or T-UP/T-DN buttons may be unavailable. DVD VIDEO MENU PLAY When playing a DVD disc in the DVD player: 1) The disc will be played automatically and stop at menu picture. 2) Use / , / cursor buttons to move between the highlight bars in the menu. 3) Press OK button to confirm the selected item. RADIO OPERATION SWITCHING TO RADIO MODE Press MODE button to select radio mode, the radio mode appears in the display together with the memory band and frequency. BAND For the unit with two bands only, press BND/LOUD button on the front panel or press BAND button on the remote control shortly to change bands as below: FM AM ADVANCED OPERATION REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: When you want to repeat playing the whole disc or a track or a chapter in the disc. 1) Press REPEAT button repeatedly to select different repeat modes. 3) 0:01:45 Item: Sound Function: Display the current sound mode; it can switch between normal and 3D surround effect mode. For VCD: PBC 0:01:45 Stereo Normal Sound Move Select Item: Time Function: Display the elapsed time; you can input the time directly to the skip to the corresponding playback point. Method: Use numeric buttons to input 18 ADVANCED OPERATION 1) PBC Item: Track Function: When it is in PBC ON mode, it display "PBC" (only display, can't be changed); when it is in PBC OFF mode, it will display the current track number and total track number (such as "1/16") and it can skip to the desired track number. Method: When in PBC OFF, press / buttons or use numeric buttons to input and confirm with OK button. 2) 0:01:45 Note: The function is only effective when the LOGO is shown. That is to say, when no disc in, ejecting a disc and in stop mode or pre-stop mode when playing DVD/VCD, pressing PAL/NTSC is effective. RANDOM PLAYING Pressing RANDOM button during playback will start to play tracks in random order. Press the button again to revert to normal playback. Note: · This function is effective on VCD, SVCD and CD. · When playing a VCD/SVCD, the random playback is effective with PBC OFF. Item: Time Function: Display the elapsed time; you can input the time directly to the skip to the corresponding playback point. Method: In PBC mode, it can't be changed. [. . . ] NO POWER · If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to "ACC". · Check if the on/off button on the front of the player is set to on. NO PICTURE · Check if the monitor or TV is switched on. · Check if select proper mode, such as Disc Play mode and AV mode. [. . . ]