User manual BOSS DVD9900B

[. . . ] Please keep this manual in a safe place for future reference. Installation precautions Choose a mounting location in your vehicle where the unit will not distract or otherwise interfere with the driver's ability to control the vehicle. Before final installation, temporarily connect the wiring according to the diagram near the end of this manual, check it to ensure that it has been connected properly, and test the unit to make sure it is working correctly. Use only the installation parts and hardware provided with the unit to ensure proper installation. Using other parts can cause malfunction and possible damage to your DVD player. [. . . ] This output is for use as an extra ON/OFF control for an external amplifier or other device. DVD470B/DVD490T User's Manual - page 12 TV Mode setup (DVD490T only) To set up the DVD player to use in the TV Tuner mode, press MODE once. Press SETUP and select "Auto Search" from the menu. The player will automatically scan for and memorize the available TV channels. The screen will display a menu of items from which to select from for that particular disc. Please note that discs vary widely in the menu options they offer. Use the cursor buttons ( ) to highlight the item you wish to select. Some discs offer a series of menus which open to offer a wide variety of choices. You can continue to navigate the menu further using a combination of the cursor buttons and the ENTER button. FAST FORWARD and FAST REVERSE Pressing the button during playback mode will cause the playback to speed up. Each additional press up to a total of four presses will step up the speed further. The fifth press will return the playback to normal playing speed. Pressing a third time will exit the repeat feature. SUBTITLE LANGUAGE Press SUBTITLE to view and select the available subtitle languages. Please note: This feature is only available on DVD discs, and only if subtitles in different languages have been recorded to the disc. DISPLAYING PLAYING TIME/STATUS Press DISPLAY. The screen will display the current elapsed play time. Press DISPLAY again to view the remaining time. Please note: The format of the information displayed is subject to the type of disc being played. PROGRAM PLAY This feature allows you to select the particular chapters and/or tracks you want to see, and determine the order in which they are played. Please note: This feature is only available on certain kinds of discs. The first step in programming is to turn off the PBC mode, and press the STOP button. The feature is now ready and the screen displays the following: ADJUSTING BASS, TREBLE AND BALANCE Press ENTER to enter the Settings selection mode. If there is no entry made within 5 seconds of the pressing of the ENTER button, the player will automatically exit the Settings selection mode. Press the keys to select the BASS setting, then press the buttons to adjust the bass level between -12 and +12. [. . . ] Use the buttons to highlight "SPDIF OUTPUT" and then press ENTER. Press the button to move to the right side of the menu, and use the buttons to highlight SPDIF/RAW or SPDIF/PCM, and press ENTER. Press the SETUP button to exit the Setup Menu. Use the buttons to highlight the desired parental control level. [. . . ]