User manual BOSS GT10D

[. . . ] 5 Detaching the control panel . . . . . . . . . . . . . . 7 Changing the control panel . . . . . . . . . . . . . . . 8 Electric Connection . . . . . . . . . . . . . . . . . . . . . . 9 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] -Adjustable when " NTSC " is selected for " NTSC/PAL " . 18 LUD 11-0:44:36 SWF POP DISC 11:08 MOD VOLUME- SEL VOLUME+ touch to select touch to adjust It`s depend on your habit to setup the data . ADJUSTABLE ITEMS: Volume: 0 to 32 Adjust volume level by using VOL + / - . Bass: -14 to +14 Adjust bass level by using VOL + / - . Treble: -14 to +14 Adjust treble level by using VOL + / - . Basic Operation Balance: R 0-10 to L 0-10 . Adjust sound balance between left and right speakers by using VOL + / - . Adjust sound balance between front and rear speakers by using VOL + / VOL - . to ahead/back (proceed/cancel) , and then press the SETUP button briefly to confirm . FM1 106. 30 MHz ST DX TA LUD SWF POP DISC 11:08 Setting Audio Modes Touch the screen the DSP range (or press the EQ/LOUD button on the remote ) to select one of the preset sound modes . The information will display in the monitor as follow : DSP (Please note : press the button longer again to renew it . ) Reset Factory Settings RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . Radio Operation During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up. When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display). The volume level is increased to the minimum value for the transmission of traffic announcements. After the traffic announcements has finished, the program that was previously running is resumed. Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . AF FUNCTION (Alternative Frequencies) In Radio mode, touch the AF section briefly to activate the AF function. Touch it again to turn off the AF function . AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into . AF Whenever the new AF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message "NEW FREQUENCY " is displayed for one or two seconds. Note : the status of the AF function is shown by an AF symbol in the display. [. . . ] Touch the RPT on the touch screen (or Pressing 2/RPT button on the remote control) repeatedly can select two kinds of repeat play mode. REP-ONE: Play the same song over and over again. REP ALL: Play all songs in the discover and over again. Touch the or section to skip a track ahead or back. [. . . ]