User manual BOSS MP3-4600R

[. . . ] BUTTONS LOCATION AND FUNCTIONING 1 PANEL RELEASE BUTTON 12 3 17 PRESET EQUALIZER BUTTON 4 PANEL OPEN/EJECT BUTTON POWER LOCAL / DX BUTTON BUTTON ENCODER VOLUME BUTTON MUTE AUDIO BUTTON BUTTON PRESET MEMORY BUTTONS (M1~M6) BAND/LOUDNESS BUTTON 10 5 2 7 13 MP3 SEARCH BUTTON MENU BUTTON 8 6 DISPLAY BUTTON IX-BASS/ SUB-WOOFER BUTTON 15 REMOTE CONTROL RECEIVER SCAN BUTTON 9 AUTOMATICALLY TUNING UP / DOWN SOURCE BUTTON / STORE / PRESET TRACK UP / DOWN SUB-WOOFER SCAN BUTTON BUTTONS LEVEL CONTOL FOLDER DOWN /UP BUTTONS 16 11 14 18 ID3 TAG INFORMATION E-1 2. HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. [. . . ] Key Illumination On/Off (KEY LIGHT) The Key Light on/off feature controls how the front panel buttons illuminate when the unit is turned off, but the ignition switch is on. When the Key Light feature is activated with the unit turned off and the ignition turned on, the front panel buttons will illuminate. When the Key Light feature is deactivated with the unit turned off and the ignition switch turned on, the front panel buttons will not illuminate. E - 10 Personal Text Message Press the MENU button you will see the "PTM" on the display , this will allow the user to input his favor . greeting note on the display. The "INPUT MESSAGE" will be displayed by default. 20 letters or symbols for the "PTM" to be displayed on the LCD. When "PTM" is displayed on the display, Press "ENTER" button to start up the "PTM" enter procedure. Rotate the encoder volume to input A to Z 0-9, +/- !Press "ENTER" button to confirm the first letter input. Repeat the procedure enter the rest of the letters. If you want to change the inputted letters , you can press Tuning up /down button to move, the cursor backwards to change the inputted letters. If no more buttons are pressed after 7 seconds the inputted letters will be automatically set as PTM. The previous PTM will be erased automatically once a new PTM is entered. Press "DISPLAY" button sequential (Frequency -> Spectrum -> Animation 1 -> Animation 2 -> PTM ). The inputted Message will scroll through the LCD continuously until a new operation of the unit has been entered. GREETING NOTE There are three different greeting notes displayed on LCD based on different condition. 1. When the unit is powered on, one of three greeting will display based on the time of day: Good Morning, Good Afternoon or Good Evening. When the unit is powered off but the ignition remains on, the LCD will scroll through the following messages if the selectable clock display feature is activated: "Enjoy Driving!When the ignition is turned off, the message "See you!Have a nice day!" will be displayed Before the unit turns off completely. IGNITION OFF CLOCK RECALL The user can recall to display the clock by pressing DISPLAY button, even when ignition is off. E - 11 8. TUNER OPERATION 13) BAND BUTTON (BAND/MP3 SERACH) Press BAND to change between FM bands and AM(MW) bands. Each band stores up to 6 preset stations. 14) TUNING UP/DOWN BUTTON ( ) Manual Tuning Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio frequency number up or down one step. [. . . ] AS/PS/ID3 Preset EQ No Function Display Clock, Spectrum Or animation or PTM /menu function Change to CD/MP3/WMA or AUX IN mode Band Auto Store/Preset Scan Change to Radio or AUX IN mode No Function CD Text Change to Radio or Aux in MP3 Search ID3 tag Information 13. Numeric Key(1) (2) (3) (4) (5) (6) Station Scan Preset station 1 Preset station 2 Preset station 3 Preset station 4 Preset station 5 Preset station 6 No Function Pause Intro scan Repeat Random No Function No Function No Function Pause Intro scan Repeat Random Folder Down Folder Up E - 19 12. SPECIFICATIONS CD PLAYER System Usable disc Sampling frequency No of quantization bits Frequency Number of channels S/N Ratio Compact disc audio system Compact disc 44. 1KHz 1bit 5-20, 000Hz 2 stereo 70dB RADIO SECTION FM Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio 87. 5-108MHz 87. 5-107. 9MHz 10. 7 MHz Better than 15dB at S/N 30 dB 25 dB at 1KHz 50 dB 522-1620KHz 530-1710KHz 450KHz Better than 45dB 40 dB AM/MW Frequency Range Intermediate Frequency Usable Sensitivity S/N Ratio GENERAL Power Supply Polarity Speaker impedance Power Output DC 11 -14V Negative Ground 4 ohms 4x 80 Watts REMARK : Specifications subject to change without notice. E - 20 13. TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom No power Cause The car ignition is not on. Solution If the power supply is properly connected to the car accessory terminal, switch the ignition key to "ACC" The fuse is blown. Disc cannot be loaded or ejected Replace the fuse. Remove the disc in the player, then put a new one. Insert the compact disc with the label facing upward. Presence of CD disc inside the player. Inserting the disc in reverse direction. [. . . ]