User manual BOSS RDS610C

[. . . ] BUTTONS LOCATION AND FUNCTIONING 1 8 11 AUTOMATICALLY STORE / PRESET SCAN BUTTON 3 CD EJECT BUTTON PANEL RELEASE TA BUTTON BUTTON VOLUME KNOB AUDIO BUTTON MUTE BUTTON PRESET MEMORY BUTTONS (M1~M6) PTY BUTTON 10 4 2 7 9 12 POWER BUTTON 6 AF BUTTON 15 REMOTE CONTROL RECEIVER 17 PRESET EQUALIZER BUTTON BAND/ LOUDNESS BUTTON DISPLAY BUTTON SOURCE TUNING UP / DOWN TRACK UP / DOWN BUTTON / BUTTONS SUB-WOOFER 13 5 16 14 E-1 2. HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. [. . . ] RESET BUTTON The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a ballpoint pen or metal object will activate it. The reset button is to be activated for the following reasons: Initial installation of the unit when all wiring is completed. All the function buttons do not operate. Note: If the unit cannot function normally after reseting, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel. E-7 7. AUDIO OPERATIONS 10) VOLUME KNOB Turn this knob to adjust desired volume level. 4) AUDIO BUTTON Press this button to select desired audio function. ORDER OF FUNCTION: VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD) While the selected function is displayed, turn Volume Knob to adjust the level within 5 seconds, otherwise the unit will return to volume adjustment mode. 2) MUTE BUTTON (MUTE) Press this button to mute the sound. 17) PRESET EQUALIZER BUTTON (EQ) Press this button to toggle the following EQ settings: FLAT->CLASSICS->POP M->ROCK M->DSP OFF At DSP OFF mode, EQ will be controlled by Bass/Treble setting. 13) BAND/LOUDNESS BUTTON (BAND/LOUD) Press the Band/Loudness Button for couple of seconds to switch the loudness on or off. When Loudness is on, display will show 'Loud On' for a few seconds. E-8 8. RADIO OPERATIONS 11) AUTO MEMORY STORE/PRESET SCAN BUTTON (AS/PS) 1. PRESET SCAN: Press AS/PS button briefly to enter Preset Scan mode, it will scan all the preset stations in the memories, you can hear that it will stay on each station for about 5 seconds. 2. AUTO MEMORY STORE: Press AS/PS button for couple of seconds to enter Auto Store mode, this feature will automatically scan the current band and enter up to 6 strongest stations into the 6 preset memories. To stop Auto Store & Scan, press the AS/PS button again. 7) STATION PRESET BUTTONS (M1-M6) 1. Press these buttons briefly to recall the stored stations in the selected band. 2. Presetting stations manually, Press the BAND button to select the band for the stations to be preset. Use Tuning Up/Down to tune in the stations to be preset. Press the Preset button at which you want to store the station for at least 2 seconds. The preset number will appear on the display accompanied by a beep, this indicates that the station has been stored into memory. 13) BAND/LOUDNESS BUTTON (BAND/LOUD) This a dual function button. Press this button shortly to change between BAND FM1, FM2 or FM3 . Press this button for couple of seconds to turn Loudness function on or off. [. . . ] CD player starts playing when you release the button. EJECT BUTTON Press this button to eject the CD from the unit. The receiver will switch to radio mode automatically. EJECT BUTTON E - 12 10. REMOTE CONTROL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 OPERATIONS: Key 1. DISP 4. TA Radio Mode Power On/Off CD Player Mode Power On/Off Adjust Vol, Bas, Tre, Fad, Bal Display Clock Adjust Vol, Bas, Tre, Fad, Bal Display Clock TA Function Tuning/Seek Up/Down AF Function PTY Function Mute Select Vol, Bas, Tre, Fad, Bal No Function Track Up/Down No Function No Function Mute Select Vol, Bas, Tre, Fad, Bal 5. [. . . ]