User manual BOSS RV-3

[. . . ] Now it is time to consider how to maximize the enjoyment you will get from knowing how to work your new car stereo receiver. We hope you enjoy using this product and encourage you to always listen at a moderate, safe sound level to avoid any possible hearing damage or loss. If you listen to excessively loud sound over time, your hearing can adapt to higher volumes and what sounds "normal" to you may be quite harmful and can cause you to have permanent hearing loss. So please practice "safe sound" and always listen at moderate sound levels only. [. . . ] B) Time adjustment From the clock mode, press the CLOCK button and hold for more than 1 seconds to flash time and then rotate the VOL knob clockwise to adjust minute, rotate the VOL knob counter clockwise to adjust hour. To select and adjust the mode of the sound and menu A) To select and adjust the sound mode: Press SEL button briefly and repeatedly to select the mode of VOL(volume), BAS (BASS)(without preset DSP), TRE(treble)(without preset DSP), BAL(balance) and FAD(FADER) in the sequence and circulation. In each mode, the waiting time is about 5 seconds, and when the waiting time is over, it will return to the the last display mode. After select a desired sound item, rotate the VOL knob on the front panel or press the + or - button on the remote controller to adjust level of the selected sound item. Page 3 Page 12 CARE FOR USING CD'S: About CD-R/CD-R/W discs: In addition to commercially-recorded audio CD's, this unit can play CD-R and CD-R/W discs. In come cases, particularly when recorded on older CD burners, some CD-R and CD-R/W discs may not play. Also, whenever you are recording a CD for playback in this receiver, it is recommended that you record at 24x or slower speed for CD-R and 4x or slower for CD-R/W to achieve higher signal quality and better playback performance. To keep the disc clean: Do not attach any sticker or adhesive tape on the disc. Handle the disc by its edge to keep the disc clean and do not touch the surface. Before playing a disc, wipe it off with a clean, dust-free cleaning cloth. Wipe the disc outwards from the disc center. Inset a disc with labeled surface up, or it will damage the unit. Do not expose the disc to direct sunlight or nearby heat sources such as heating vents, caliduct which can cause the disc to warp. The minimum value of the defaulted volume level you can set is 10. G) ESP 6/ESP 25 To select the time of the electronic shock protection for disc playback. EJECT (EJ) BUTTON Push this reset button with a cuspidal object to renovate the distorted program once the program is distorted. RESET BUTTON To rem ove the front panel, after flippin g down the front panel, push it rightwards firstly, then draw the le ft of the front pa nel outwards. 8. To reset the unit When the LCD displays wrongly or some function knobs are disable, press the REL button to flip down the front panel and then take it away from the unit chassis. Push the RESET button with one needle analog to reset the distorted program to zero. To take away the front panel Press the REL button to flip down the front panel and then take it away from the head unit. And the anti-theft LED indicator will flash all the time till the front panel is assembled back to the head unit. Before inserting or ejecting disc, press the REL button to flip down the faceplate. Page 11 Page 4 PDF created with FinePrint pdfFactory trial version http://www. pdffactory. com RADIO OPERATION: 1. To select radio band Under RADIO mode, press the BAND button shortly and repeatedly to select your desired radio band in sequence and circulation as follows: -->FM1-->FM2-->FM3-->AM1-->AM2--> . To select the radio station manually or automatically Under RADIO mode, short press the >>| or |<< button repeatedly to manually tune up or down for the desired radio station step by step. Long press the >>|/ |<< button to automatically tune up or down for the radio station of strong signal. To store the current station or turn on the preset station A) Press one of 1-6 number buttons hold for more than 1 second until the second beep output to store the current station in the preset memory bank of the number button for the current band. So the unit can store 30 preset stations. [. . . ] To repeat track(s) Under USB mode, press RPT button shortly to display M-RPT and play the current track repeatedly. Under CD/MP3/WMA disc mode, press RPT button shortly to display S-RPT and play the current track repeatedly. Under USB or MP3/WMA disc mode, Press RPT button long to display D-RPT and play the current folder repeatedly. During RPT mode, Press RPT button again to cancel RPT mode. [. . . ]