User manual BOSTON ACOUSTICS DSI280

[. . . ] If you need to remove the grille, gently lift it out at the edges. Each speaker has a knockout molded into the speaker baffle that will accommodate standard 1/2-inch diameter infrared (IR) sensors. Lay the speaker face down on corrugated cardboard. [. . . ] The speaker must slide into the wall woofer side first. If you wish to paint your speakers or grilles it should be done prior to installation of the grille. Insert the grille into the slots in the baffle by gently applying pressure along the edge. The speakers may be painted before or after they are installed. Insert the supplied paint mask into the frame of the speaker. If you are using spray paint, apply two light coats. If you are applying paint with a brush or roller, thin the paint and apply two very light coats. This helps prevent excessive paint buildup or "runs" on the frame. After the paint has dried, use the finger pulls to remove the paint mask. Carefully remove the cloth from the inside of the grille. If you are using spray paint, apply two light coats. If you are applying paint with a brush or roller, thin the paint and apply two very light coats. This helps prevent paint from filling the holes on the grille. After the paint is dry, reinstall the cloth and grille logo. [. . . ] Rich Gorzynski, Project Manager: 978/538-5141 Product Manual: DSI250 & DSI260 DSi280 Date: 6/15/04 Scale: 100% BA P/N: 142-001490-4 Note: Dimensions in millimeter Keylines not to print Revisions: Rev 2; Addition of DSi260 Rev 3; Reduction of doc size. rev 4; Addition of DSi280 and RoHs Notes This drawing and data embody proprietary designs and information which is the confidential property of Boston Acoustics, None of which shall be copied, reproduced, disclosed to others, proposed or used in whole or in part, for any purpose without express written permission of a duly authorized agent of Boston Acoustics. This drawing is subject to recall by Boston Acoustics at any time. [. . . ]