User manual BOSTON ACOUSTICS MCS 130

[. . . ] The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. only use attachments/accessories specified by the manufacturer. [. . . ] it is advisable to connect the speaker wire prior to wall-mounting. NOTE: Because there are so many different kinds of surfaces on which the speakers could be mounted. There is no one type of fastener that we could supply that would work in all the possible situations. So taking into account the surface the speaker is being mounted on, acquire the appropriate type of fasteners. If you're not sure what type of fastener to use, take the mounting bracket to a friendly hardware store, tell them about the wall you're mounting the speaker on, and ask them to recommend an appropriate fastener. 4 Use the lower screw hole for normal speaker position; use the upper screw hole to tilt the speaker forward. After your speakers are properly placed, you are ready to wire your system. Use the speaker wire include with the system to make your connections. Please see the illustration below for guidance connecting the wires to the MCS 130 satellites and center channel. For connection to your receiver please refer to its owner's manual. Connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker. connect the ­ (black) terminals in the same way. If the connections are not made correctly it can cause poor bass response and imaging. Also, to avoid short circuits that may damage your equipment be careful not to let any of the bare wires touch each other. Be sure to maintain proper + and ­ polarity at all speaker wire connections. Speaker wires can be routed through the channels on the back of the speaker and the holes in the feet. Use the subwoofer cable included with your system to connect the subwoofer to your receiver's Subwoofer or LFE output. Connect the other end to the "Line In" on the back of the Subwoofer. Plug the subwoofer AC cord into a wall outlet. We do not recommend using the outlets on the back of the receiver. set the power switch to the desired setting. OFF ­ The subwoofer is off and will not produce any sound. [. . . ] For EU Customers Only This symbol found on the product indicates that the product must not be disposed of with household waste. Instead, it may be placed in a separate collection facility for electronic waste or returned to a retailer when purchasing similar product. The producer paid to recycle this product. Doing this contributes to reuse and recycling, minimizes adverse effects on the environment and human health and avoids any fines for incorrect disposal. [. . . ]