User manual BOSTON ACOUSTICS PRO 8.54 4OHM 8 WOOFER

[. . . ] ProSeries 12. 5LF 10. 5LF 8. 5LF Competitor Series 1500 1200 1000 800 Generator Series GS1500 GS1200 GS1000 Boston Acoustics Subwoofer Installation Manual Table of Contents Enclosure Recommendations Building an Enclosure Locating Subwoofer Enclosure In Vehicle Hatchbacks/Sport Utility Vehicles Sedans Wiring 2 ohm subwoofers 4 ohm subwoofers Specifications Theile/Small Parameters 3 5 6 6 7 8 8 9 10 10 Congratulations!You have purchased the finest automotive subwoofer the industry has to offer. [. . . ] Drill pilot holes to prevent the wood from splitting and tighten the screws as much as possible. Excess glue can be wiped off with a damp sponge or paper towel. Warning It is extremely important to completely seal the enclosure. Even small leaks can have a dramatic effect on subwoofer performance. Look, listen, and test for leaks at all joints, around the subwoofer perimeter, and at the wire entrance location. Glue Screws Sealant 5 Locating Subwoofer Enclosure in Vehicle The placement of the enclosure is one of the most important factors concerning installation. As each vehicle's interior acoustics are different, experimentation is the key to optimizing performance. Hatchbacks/Sport Utility Vehicles Locate the enclosure in a rear corner for maximum output. Experiment with the subwoofer's placement. Hatchback Installation Warning Make sure the enclosure is securely mounted in such a way as to not shift or fly forward in the event of an accident or sudden stop. 6 Sedans Provide as clear a path as possible into the cabin by venting through a folded-down arm rest, venting through the rear deck, or venting through an unused speaker opening in the rear deck. Keep any restrictive materials such as wood, hard plastic or metal from directly blocking the subwoofer. [. . . ] 978. 538. 5000 Boston and Boston Acoustics are registered trademarks of Boston Acoustics, Inc. ©1999 Covered by patents issued and/or pending. [. . . ]