User manual BOSTON ACOUSTICS SOLO II

[. . . ] This symbol found on the apparatus indicates hazards arising from dangerous voltages. This symbol found on the apparatus indicates the user should read all safety statements found in the user manual. This symbol found on the apparatus indicates double insulation. install in accordance with the manufacturer's instructions. [. . . ] Turn the MODe control until the clock icon is highlighted with brackets . The display 2 4 reverts to its previous mode and the new time is set. Note: The clock can display time in either 12 hour or 24 hour format. To change the time display turn the MODe control to highlight the clock icon with brackets . Turn the MODe control to select the time format you want, then press the control. Turn the MODe control until the source you want is highlighted with brackets. Note that other function and alarm setting control icons also may be selected. 2 Press the MODe control to select the highlighted item. Or just wait a few seconds and the source is automatically selected. the Solo begins playing the source selected. Note: You can also select sources by simply pressing the MODe control. Each press will select the next source in this sequence: AM > FM > AUX > Presets > AM, etc. This illustration shows the FM source highlighted for selection. Turn the tune control until the station frequency you want shows in the display. If the radio source you want it already selected you can skip step 1 and use the tune control to tune in a new station. If the station you select has been assigned to a station preset the number is displayed. Use the MODe control to select the AM or FM radio band you want to use. The preset number will light indicating the station has been assigned to the preset. The presets can be used to store either AM or FM stations. Because of the way the Solo II places stations in the presets you may want to plan how you store them. The first station you store goes into Preset 1. The second station goes into Preset 2 and so on, up to 20 stations. [. . . ] The display will return to its previous state with the Sleep icon lit. In this example the Sleep turn off delay is set to 30 minutes. notes: · To cancel the Sleep delay before it has finished, follow steps 1 ­ 3. Turn the MODe control down until "Off" appears in the display. [. . . ]