User manual BRANDT BKS6135B

[. . . ] Keep this user guide with your appliance. If you sell or give the appliance to anyone else, make sure that you also give them this manual. Please read this advice carefully before installing and using your appliance. It is intended to protect your safety and the safety of others. [. . . ] Do not try to rotate the glass turntable manually, as you could damage the drive system. If it does not turn smoothly, make sure that there is nothing in the well beneath the turntable. When the turntable is in the stop position, large dishes can be used which cover the entire surface of the oven. In this case, it is necessary to turn the container or to mix its content half-way through the programme. When you receive the appliance, unpack it or have it unpacked immediately. Make a note of any reservations on the delivery slip and keep a copy. Check and respect the appliance's characteristics that appear on the nameplate. This appliance must be installed under a worktop as shown in the installation diagram. Do not use your appliance immediately (wait approximately 1 to 2 hours) after moving it from a cold location to a hot location, as the condensation may cause a malfunction. Centre the oven in the cabinet so as to ensure a minimum distance of 10 mm between the appliance and the surrounding unit. Of the cabinet supporting the appliance must be heat resistant (or covered with a heat-resistant material). For greater stability, attach the oven to the cabinet with 2 screws through the holes provided on the side panels. The appliance must be recess-fitted correctly to ensure electrical safety. The electrical connections should be made before the appliance is installed in its housing. Ensure that: - the electrical installation has sufficient voltage (16 Amps), If the electrical installation in your home requires any changes in order to connect your appliance, contact a professional electrician. During maintenance operations, the appliance must be unplugged from the electrical grid; fuses must be switched off or removed. Warning: The safety wire (green-yellow) is connected to the appliance's terminal and must be connected to the installation's earth. If the oven malfunctions in any way, unplug the appliance or remove the fuse corresponding to the sector where the oven is hooked up. Warning: We cannot accept liability for any accident or incident resulting from nonexistent, defective or incorrect grounding. When switching on the display flashes at 12:00. If there is a power cut, the clock flashes. The function selector switch must be in the 0 position. [. . . ] Turn the function selector to the automatic function of your choice. Enter the weight of the food with + and - in 50g By pressing , you access the cooking end time Use a window washing product applied to a soft cloth. Warning Do not use scouring products, abrasive sponges or metal scrapers to clean the glass oven door as this could scratch the surface and cause the glass to shatter. It is recommended that you regularly clean your oven and remove any food debris on the inside and outside of the appliance. [. . . ]