User manual BRANDT SM2603B

[. . . ] ) 250 g 6 -7 min 200 W assiette plate sur plateau tournant 15 EN INSTRUCTION MANUAL Microwave oven SM2602 Dear Customer, You have just purchased a Brandt microwave oven and we would like to thank you. We have placed in this appliance all our passion and know-how so that it best meets your needs. Innovation and performance: we designed it so that it is always easy to use. In the line of Brandt products, you will also find a wide range of ovens, hobs, ventilation hoods, electronic cookers, dishwashers, refrigerators and freezers that can be coordinated with your new Brandt microwave oven. [. . . ] We thank you for your help in protecting the environment. 01 21 EN 2/INSTALLING YOUR APPLIANCE In the case of connections with an electric receptacle, it must remain accessible after installation of the appliance. The oven’s neutral conductor (blue wire) must be connected to the network’s neutral conductor. In your electrical installation, allow for a user-accessible device that must be able to separate the appliance from the main power supply and whose contact opening is at least 3 mm above all the terminals. If the power cable is damaged, it should be replaced by the manufacturer, its after-sales service department or by a qualified person to avoid danger. € BEFORE HOOK-UP Warning: Ensure that your appliance has not suffered any damage during transport (deformed seal or door, etc. If you see any kind of damage, before doing anything else, contact your retailer. In order to easily locate the reference information for your appliance, we recommend that you note these datas on the “AfterSales Service Department and Customer Relations” page. • ELECTRICAL CONNECTION Ensure that: - The electrical installation has sufficient voltage. - The electrical wires are in good condition. - The diameter of the wires complies with the installation requirements. - Your electrical installation is equipped with 16-ampere thermal-sensitive protection. In case of doubt, consult your electricianinstaller. The electrical connections are made before the appliance is installed in its housing. Electrical safety must be provided by a correct build-in. During installation and maintenance operations, the appliance must be unplugged from the electrical grid; fuses must be cut off or removed. The oven must be connected with a power cable (standardized) with three 1. 5 mm2 conductors (1 ph + 1 N + ground) that must be connected to a monophase 220-240 V network via a CEI 60083 standardised receptacle (1 ph + 1 N + ground lead) or in accordance with installation rules. The safety wire (green-yellow) is connected to the appliance’s terminal and must be connected to the ground lead of the electrical set-up. 22 Warning: We cannot be held responsible for any accident resulting from an inexistent, defective or incorrect ground lead. If the oven malfunctions in any way, unplug the appliance or remove the fuse corresponding to the sector there the oven is hooked up. 2/INSTALLING YOUR APPLIANCE • UTENSILS EN See the instructions on “Materials you can use in microwave oven or to be avoided in microwave oven. [. . . ] They are on sale at your regular retailer, along with a complete line of accessories and consumable products. 27 EN 5/TROUBLESHOOTING If you have doubts about the proper functioning of your appliance, this does not necessarily mean it is broken. In any event, check the following items: You observe that . Check the electrical connection of your appliance. [. . . ]