User manual BRAUN 3570

[. . . ] Active, 4-way moving massage rollers stimulate the skin before and after the hair is removed to offset the pulling sensation. The underarm epilation head B is perfectly suited to follow the contours of delicate body parts such as under the arms and the bikini lines. A reduced number of tweezers and the narrow design, specifically adapted to these body areas, This appliance must never be used near water (e. Keep the appliance out of the reach of children. [. . . ] Some useful tips Epilation is easier and more comfortable when the hair is at the optimum length of 2-5 mm (0, 08-0, 2 in. ) If hairs are longer, we recommend that you either shave first and epilate the shorter re-growing hairs after 1 or 2 weeks. When epilating for the first time, it is advisable to epilate in the evening, so that any possible reddening can disappear overnight. To relax the skin we recommend applying a moisture cream after epilation. Fine hair which re-grows might not grow up to the skin surface. Or exfoliation peelings helps to prevent in-growing hair as the gentle scrubbing action removes the upper skin layer and fine hair can get through to the skin surface. 4-way moving pain softener Epilation head Underarm epilation head Release buttons Switch Socket for cord connector Cord connector 12 V transformer plug Your skin must be dry and free from grease or cream. Keep in mind that epilation is more comfortable when the hair is at the optimum length of 2-5 mm (see section «Some useful tips»). Before starting, thoroughly clean the epilation heads 2 and B. For leg epilation, choose epilation head 2, put it on and make sure that the 4-way moving pain softener 1 is in place. For underarm and bikini line epilation, we recommend that you use the underarm epilation head B. To change epilation heads, press the release buttons 3 on the left and the right and pull off the epilation head. Plug the cord connector 6 into the socket 5 and plug the transformer plug 7 into an electrical outlet. 1 To turn on the appliance, slide switch 4 to setting « 2 » (« 2 » = normal speed, « 1 » = reduced speed). for optimum performance hold the appliance at a right angle (90°) against your skin. Guide it in a slow, continuous movement without pressure against the hair growth, in the direction of the switch. The SoftLiftTM tips will make sure that even flat lying hair is lifted and removed thoroughly at the root. As hair can grow in different directions, it may also be helpful to guide the appliance in different directions to achieve optimum results. Both rollers of the 4-way moving pain softener should always be kept in contact with the skin, allowing the pulsating movements to stimulate and relax the skin for a gentler epilation. 3 Leg epilation (epilation head 2 with 4-way moving pain softener 1) Epilate your legs from the lower leg in an upward direction. [. . . ] Give the top of the housing a quick clean with the brush. Place the epilation head and the 4-way moving pain softener back on the housing. Subject to change without notice This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC). Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. [. . . ]