User manual BRAUN 730S-4

[. . . ] Do not exchange or manipulate any part of it. Do not use an extension cord with this appliance. Close supervision is necessary when this appliance is used by, on, or near children or invalids. Use this appliance only for its intended use as described in this manual. [. . . ] The different settings are indicated by the pilot light incorporated in the on/off switch 5: · White (for a thorough comfortable shave in sensitive areas of your face such as neck) For a thorough and fast shave we recommend the (+) setting. When switching on next time, the last used setting will be activated. How to use Press the on/off switch 5 to operate the shaver: · The pivoting shaver head and floating foils automatically adjust to every contour of your face. Under the nose) slide the shaver head «lock» switch 3 to the back position to lock the pivoting head at an angle. Tips for the perfect shave For best shaving results, Braun recommends you to follow 3 simple steps: 1. At all times, hold the shaver at right angles (90°) to your skin. Stretch your skin and shave against the direction of your beard growth. The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. regular cleaning ensures better shaving performance. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean: · Switch the shaver on (cordless) and rinse the shaving head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. ⷠNext, switch off the shaver, press the release button 2 to remove the Foil & Cutter cassette 1 and let it dry. ⷠIf you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the Foil & Cutter cassette. Alternatively, you may clean the shaver using the brush provided: Using the brush, clean the inner area of the pivoting head. However, do not clean the foil and cutter cassette with the brush as this may damage it. Replacing the Foil & Cutter cassette / reset To maintain 100% shaving performance, replace the Foil & Cutter cassette 1, when the replacement symbol lights up on the shaver display 9 (after about 18 months) or when cassette is worn The replacement symbol will remind you during the next 7 shaves to replace the Foil & Cutter cassette. After you have replaced the Foil & Cutter cassette, use a ball-point pen to push the reset button 8 for at least 3 seconds to reset the counter. While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time. To protect the environment, do not dispose of the appliance in the household waste at the end of its useful life. [. . . ] please call 1-800-Braun 11 (800-272-8611) to be referred to the authorized Braun Service Center closest to you. This warranty does not cover foil and cutter cassette or damage resulting from accident, misuse, abuse, dirt, water, tampering, unreasonable use, normal wear, servicing performed or attempted by unauthorized service agencies or failure to provide reasonable and necessary maintenance, including recharging. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other legal rights which vary from state to state. [. . . ]